Skip to content
TapBuff
ZIP

Bridge Water Resources

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
69 people
Connections
50
Water source
Groundwater
Based in
Raymond, WA
County
Pacific
Owner
Private
The ZIP code it serves

98638

The short answer

Nothing in EPA’s and Washington’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Nitrate: Washington’s own results, samples taken from Dec. 5, 2023 to Sept. 15, 2026.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 29, 2018 to Aug. 29, 2018. Newer results are in the utility’s annual water quality report.

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.34ppm

Highest yearly average, 2018

Averaged by year, the highest was 0.34 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate results here are Washington’s own from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Bridge Water Resources’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Dec. 5, 2023 to Sept. 15, 2026; EPA’s compliance samples are from Aug. 29, 2018 to Aug. 29, 2018.

Testing your own tap

Bridge Water Resources’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Bridge Water Resources serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pacific County DCD WQ Laboratory

    South Bend, WA · about 11 miles

    Certified for bacteria

    (360) 875-9356

  • Lewis County Environmental Health Laboratory

    Chehalis, WA · about 37 miles

    Certified for bacteria, nitrate

    (360) 740-1237

  • ALS Environmental - Kelso

    Kelso, WA · about 50 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (360) 577-7222

All 84 certified labs for Washington

Sources

PWSID WA5352075. Rebuilt from EPA data on Oct. 18, 2026.

Also in Pacific County

All Washington utilities

What to do next