Skip to content
TapBuff

South Jordan City

EPA’s and the City of South Jordan’s records have results for 37 contaminants in its water; 8 were found.

Serves 89,704 people · Surface water bought from another system · South Jordan, UT

Serves
89,704 people
Connections
26,555
Water source
Surface water bought from another system
Based in
South Jordan, UT
County
Salt Lake
Owner
Local government
The 2 ZIP codes it serves

84009, 84095

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, uranium and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 25 to Oct. 3, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, uranium and arsenic: the annual water quality reports the City of South Jordan publishes, 2021 to 2025, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 8 results

Lead, uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 82.7 ppb

Highest result, 2024 · Forms or is added in treatment

The highest sample, in 2024, was 82.7 ppb, above EPA’s legal limit of 80 ppb. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

How it’s judged

EPA judges this limit on running averages at each sampling point. EPA’s record is the verdict; the utility’s annual report lists any violation the state found.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 53.1 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lithium, Health reference level 10 ppb; highest 9.9 ppb

Highest sample, April 15, 2024; found in 2 of 8 · Comes from the source

The highest sample was 9.9 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 40.5 ppb

Highest result, 2024 · Forms or is added in treatment

The highest sample, in 2024, was 40.5 ppb, below EPA’s legal limit of 60 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 27.5 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 2.9 ppm

Highest result, 2022 · 2025 average: 1.2 ppm · Comes from the source

The highest sample, in 2022, was 2.9 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.1 ppb

90th percentile, 2021 to 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.6 ppm

Highest yearly average, 2021 to 2025 · 2025 average: 0.3 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.6 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.7 ppm. In 2025, the latest year on file, it averaged below the limit.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 3.8 ppb

Highest yearly average, 2021 to 2024 · 2024 average: 3.5 ppb · Comes from the source

Averaged by year, the highest was 3.8 ppb, in 2022, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 11 ppb. In 2024, the latest year on file, it averaged below the limit.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.2 ppb

Highest yearly average, 2021 to 2025 · 2025 average: 1.2 ppb · Comes from the source

Averaged by year, the highest was 1.2 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.3 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Utilities above EPA’s PFAS limits, state by state⁠
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

South Jordan City reported another disinfectant and chlorine dioxide but neither chlorine nor chloramine, in its 2024 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, uranium and arsenic results here are from the annual water quality reports the City of South Jordan publishes, from 2021 on, with EPA’s national file for 2012 to 2019. South Jordan City’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 25 to Oct. 3, 2024; the reports the City of South Jordan publishes cover 2021 to 2025.

Testing your own tap

South Jordan City’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. South Jordan City’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 4.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Utah certifies closest to the area South Jordan City serves, or a kit by mail

The 3 labs Utah certifies closest to the area South Jordan City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Chemtech-Ford, Inc.

    Sandy, UT · about 4 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (801) 262-7299

  • Jordan Valley Laboratory

    Herriman, UT · about 6 miles

    Certified for bacteria, nitrate, minerals and other inorganics, disinfection byproducts

    (801) 446-2000

  • Utah Department of Health Division of Lab Services (EPA cert.)

    Taylorsville, UT · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts, PFAS

    (801) 965-2400

All 60 certified labs for Utah⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID UTAH18023. Rebuilt from EPA data on Oct. 25, 2026.