Skip to content
TapBuff
ZIP

Monte Verde

What EPA’s and Utah’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
93 people
Connections
28
Water source
Groundwater
Based in
Morgan, UT
County
Morgan
Owner
Private
The ZIP code it serves

84050

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2026.

Arsenic, nitrate, fluoride and chromium (total): Utah’s own results, samples taken from June 4, 2020 to June 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

2.2ppb

90th percentile, 2024 to 2026

In the latest period, 9 in 10 homes sampled were at or below 2.2 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Arsenic

Comes from the source

Above the health goal

1.0ppb

Highest yearly average, 2026

Averaged by year, the highest was 1.0 ppb, in 2026: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.8 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

3.3ppm

Highest sample; found in 7 of 7

2026, one sample: 3.0 ppm

The highest sample, in 2025, was 3.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 3.0 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.1 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.11ppm

Highest yearly average, 2026

Averaged by year, the highest was 0.11 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.18 ppm, in 2017.

What handles it

One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best reverse osmosis systems, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyOct. 1, 2017—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 7 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, fluoride and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Monte Verde’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Utah’s results run from June 4, 2020 to June 1, 2026.

Testing your own tap

Monte Verde’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

The 3 labs Utah certifies closest to the area Monte Verde serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Weber Basin Water Quality Laboratory

    Layton, UT · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

    (801) 771-1677

  • Summit County Health Department Laboratory

    Coalville, UT · about 16 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (435) 336-3234

  • Davis County Environmental Health Laboratory

    Clearfield, UT · about 19 miles

    Certified for bacteria, minerals and other inorganics

    (801) 525-5115

All 60 certified labs for Utah

Sources

PWSID UTAH15007. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Morgan County

All Utah utilities

What to do next