Skip to content
TapBuff

Elkridge Water Company

What EPA’s and Utah’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals, plus violations since 2016, with the certification that handles each result.

Serves
178 people
Connections
200
Water source
Groundwater
Based in
Alton, UT
County
Kane
Owner
Private
The ZIP code it serves

84762

The short answer

Nothing in EPA’s and Utah’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, not everything. 2 health-based violations since 2016.

What was found

Nitrate: Utah’s own results, samples taken from Dec. 30, 2020 to Nov. 25, 2025, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits1

Nitrate

Comes from the source

Below EPA’s limits

1.1ppm

Highest sample; found in 6 of 12

2025 average: 0.42 ppm

The highest sample, in 2023, was 1.1 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its two samples averaged 0.42 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.52 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Nov. 1, 2024 to Nov. 30, 2024—Resolved
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencySept. 2, 2022—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 16 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Elkridge Water Company’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Utah’s results run from Dec. 30, 2020 to Nov. 25, 2025.

Testing your own tap

Elkridge Water Company’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

The 3 labs Utah certifies closest to the area Elkridge Water Company serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Southern Utah University Water Laboratory

    Cedar City, UT · about 22 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (435) 586-7914

  • Southwest Utah Public Health Laboratory

    St. George, UT · about 54 miles

    Certified for bacteria, nitrate

    (435) 986-2598

  • St. George RWRF Laboratory

    St. George, UT · about 58 miles

    Certified for bacteria

    (435) 627-4269

All 60 certified labs for Utah

Sources

PWSID UTAH13042. Rebuilt from EPA data on Oct. 18, 2026.