Skip to content
TapBuff
ZIP

Bridgerland Water Co

What EPA’s and Utah’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
240 people
Connections
190
Water source
Groundwater
Based in
North Ogden, UT
County
Rich
Owner
Private
The ZIP code it serves

84028

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2022 to 2023.

Arsenic, nitrate, chromium (total) and fluoride: Utah’s own results, samples taken from July 31, 2020 to March 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

1.5ppb

90th percentile, 2021 to 2023

In the latest period, 9 in 10 homes sampled were at or below 1.5 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Arsenic

Comes from the source

Above the health goal

1.0ppb

Highest yearly average, 2021 to 2024

2024, one sample: 1.0 ppb

Averaged by year, the highest was 1.0 ppb, in 2021: below EPA’s legal limit of 10 ppb, but above its health goal of zero. In 2024, the latest year on file, its one sample was 1.0 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits1

Nitrate

Comes from the source

Below EPA’s limits

0.34ppm

Highest sample; found in 7 of 7

2026, one sample: 0.33 ppm

The highest sample, in 2021, was 0.34 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 0.33 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.52 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Fluoride

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best reverse osmosis systems, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyJan. 1, 2025—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 5 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, chromium (total) and fluoride results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Bridgerland Water Co’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Utah’s results run from July 31, 2020 to March 19, 2026.

Testing your own tap

Bridgerland Water Co’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

The 3 labs Utah certifies closest to the area Bridgerland Water Co serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bear River District Health Department Water Laboratory

    Logan, UT · about 24 miles

    Certified for bacteria, nitrate

    (435) 792-6578

  • Brigham City Laboratory

    Brigham City, UT · about 43 miles

    Certified for bacteria, minerals and other inorganics

    (435) 226-1443

  • Northrup Grumman Space Systems Environmental Laboratory

    Corinne, UT · about 48 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (801) 863-8117

All 60 certified labs for Utah

Sources

PWSID UTAH17001. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Rich County

All Utah utilities

What to do next