Skip to content
TapBuff
ZIP

Alpine Cove Water Ssd

What EPA’s and Utah’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
230 people
Connections
63
Water source
Groundwater
Based in
Orem, UT
County
Utah
Owner
Private
The ZIP code it serves

84004

The short answer

2 results are above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 1998 to 2025.

Uranium, nitrate, fluoride, arsenic and chromium (total): Utah’s own results, samples taken from Aug. 11, 2020 to Sept. 2, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal2

Uranium

Comes from the source

Above the health goal

24.9ppb

Highest yearly average, 2026

Averaged by year, the highest was 24.9 ppb, in 2026: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Lead

Comes from pipes, often your own

Above the health goal

0.6ppb

90th percentile, 2023 to 2025

In the latest period, 9 in 10 homes sampled were at or below 0.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

1.7ppm

Highest sample; found in 20 of 21

2026 average: 0.87 ppm

The highest sample, in 2025, was 1.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged 0.87 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 1.3 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.1ppm

Highest yearly average, 2022 to 2025

Averaged by year, the highest was 0.1 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.22 ppm. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.3 ppm, in 2014.

What handles it

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 14 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Uranium, nitrate, fluoride, arsenic and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Alpine Cove Water Ssd’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Utah’s results run from Aug. 11, 2020 to Sept. 2, 2026.

Testing your own tap

Alpine Cove Water Ssd’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

The 3 labs Utah certifies closest to the area Alpine Cove Water Ssd serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Chemtech-Ford, Inc.

    Sandy, UT · about 9 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (801) 262-7299

  • Jordan Valley Laboratory

    Herriman, UT · about 11 miles

    Certified for bacteria, nitrate, minerals and other inorganics, disinfection byproducts

    (801) 446-2000

  • Utah Department of Health Division of Lab Services (EPA cert.)

    Taylorsville, UT · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts, PFAS

    (801) 965-2400

All 60 certified labs for Utah

Sources

PWSID UTAH25124. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Utah County

All Utah utilities

What to do next