Bloomingdale Utility DistrictWater quality report

Standards for what was found here

5358
Serves
13,318
Connections
5,716
Water source
Surface water
Based in
Kingsport, TN
County
Sullivan
Owner
Local government
The 5 ZIP codes it serves

24251, 24258, 37617, 37660, 37664

PWSID TN0000056 · EPA data

Read this first

  • PFOS was found in one of 4 samples, highest 4.3 ppt. Above the 4.0 ppt legal limit in at least one sample. Compliance is judged on a running annual average, not one sample.
  • Lead In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below the 15 ppb action level. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

1 health-based violation since 2016. Details are below.

What handles it

What was found, stop by stop

  • Below the health goal
  • Above the health goal
  • Above the legal limit
  • No federal data
  1. At the source

    EPA UCMR 5 sampled this utility for 29 PFAS and lithium from May 3, 2023 to Feb. 14, 2024. Each tick under a result’s line is one sample where it was found, dated when you point at it.

    NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

  2. PFOS

    Above the legal limit

    4.3ppt

    Highest of 4 samples; found in one

    Above the 4.0 ppt legal limit in at least one sample. Compliance is judged on a running annual average, not one sample.

    • NSF/ANSI 53 · Look for: PFOS ReductionSame claim, other certifiers’ wording: Total PFAS Reduction; Perfluorooctane Sulfonate (PFOS)

    • NSF/ANSI 58 · Look for: Perfluorooctane Sulfonate (PFOS)

  3. In treatment

    No federal results for this stop. Disinfection byproduct, chlorine and fluoride levels are in Bloomingdale Utility District’s own annual report, which it must send you every year.

  4. In the pipes

    Lead and copper, from the homes the utility samples. Your own service line, solder and fixtures decide yours.

  5. Lead

    Above the health goal

    1.0ppb

    90th percentile, 2023 to 2025

    In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below the 15 ppb action level. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

    EPA SDWIS, lead and copper monitoring periods ending 2004 to 2025. The line stops at the latest period; each tick under it is an earlier one.

  6. At your tap

    The last stretch is your own plumbing. A certified lab test is the only way to know what reaches your glass. Lead in your water: what to do

Tested and not found

Below EPA’s minimum reporting level in every sample taken from May 3, 2023 to Feb. 14, 2024. Not found means not measured above that level, which is not the same as zero.

All 29 compounds tested and not found
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Long Term 2 Enhanced Surface Water Treatment RuleFailure Submit Treatment Requirement RptApril 1, 2019—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 4 monitoring or reporting violations not shown.

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: PFOS Reduction, Lead Reduction

    For: PFOS, Lead

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOS, Lead

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Compare five-year costs

Filters with those claims on a certifier’s listing

TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

What this report cannot tell you

  • Levels of everything else. Federal bulk data carries results for PFAS, lithium, lead and copper, and violations for the rest. Nitrate, arsenic, disinfection byproducts and other levels are in Bloomingdale Utility District’s own annual report, which it must send you every year.
  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
  • Anything after the latest data. SDWIS data is from 2026 Q2; UCMR 5 samples are from May 3, 2023 to Feb. 14, 2024.

What to do next

  1. Start with PFOS

    What each marked result does to health, where it comes from, and the certification claim that addresses it.

  2. Read the utility’s own report

    Bloomingdale Utility District must send you a water quality report every year. It lists nitrate, arsenic and byproduct levels this page cannot.

  3. Test your own tap for lead

    Your service line, solder and fixtures decide the lead at your faucet, not the utility’s average.

  4. Compare five-year costs

    What the filters certified for these results cost over five years, cartridges included.