Skip to content
TapBuff

Davison Rural Water System Inc

EPA’s and South Dakota’s records have results for 4 contaminants in its water; 4 were found.

Serves 3,485 people · Surface water bought from another system · Mitchell, SD

Serves
3,485 people
Connections
1,394
Water source
Surface water bought from another system
Based in
Mitchell, SD
Counties
Davison, Aurora, Douglas, Sanborn
Owner
Private
The 6 ZIP codes it serves

57301, 57331, 57334, 57359, 57363, 57368

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2022.

Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride: the annual water quality reports South Dakota writes for each utility, 2025, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 42.5 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 42.5 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 43.2 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 84.3 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12.9 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 12.9 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 13.7 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 46 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest 0.56 ppm

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 0.56 ppm, below EPA’s legal limit of 4.0 ppm.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2022 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride results here are from the annual water quality reports South Dakota writes for each utility, from 2025 on, with EPA’s national file for 2012 to 2019. Davison Rural Water System Inc’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; the reports South Dakota writes cover 2025.

Testing your own tap

Davison Rural Water System Inc’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Dakota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Davison Rural Water System Inc’s latest lead sampling in EPA’s records, 2022, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 2 labs South Dakota certifies closest to the area Davison Rural Water System Inc serves, or a kit by mail

The 2 labs South Dakota certifies closest to the area Davison Rural Water System Inc serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Sioux Falls Public Health Laboratory

    Sioux Falls, SD · about 73 miles

    Certified for bacteria

    (605) 367-8777

  • American Engineering Testing

    Sioux Falls, SD · about 73 miles

    Certified for bacteria

    (605) 332-5371

All 16 certified labs for South Dakota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Dakota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Dakota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SD4601090. Rebuilt from EPA data on Oct. 25, 2026.