Town of Ware Shoals
EPA’s and South Carolina’s records have results for 33 contaminants in its water; 8 were found.
Serves 3,174 people · Surface water bought from another system · Ware Shoals, SC
- Serves
- 3,174 people
- Connections
- 1,585
- Water source
- Surface water bought from another system
- Based in
- Ware Shoals, SC
- County
- Greenwood
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. PFOS is above EPA’s new limit, which takes effect in 2029. HFPO-DA (GenX) and PFOA had a sample above it, but not on average, the way EPA will judge it. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 20 to Dec. 18, 2024.
Haloacetic acids (HAA5) and total trihalomethanes (TTHM): South Carolina’s own results, samples taken from Sept. 9, 2020 to Sept. 9, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFAS: HFPO-DA (GenX), PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 5.6 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 1 result
PFOS
Comes from the source
8.4 ppt
Highest sample, Dec. 18, 2024; found in 4 of 4
The highest sample was 8.4 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.5 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
A sample above EPA’s 2029 limit, below it on average, 2 results
HFPO-DA (GenX)
Comes from the source
22 ppt
Highest sample, March 20, 2024; found in 4 of 4
The highest sample was 22 ppt, about twice EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt. Averaged at each sampling location, the way EPA will judge it, it is at the limit as EPA rounds results, not above it.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 12.8 ppt, at it as EPA rounds results, not above it.
What handles it
No certification claim covers this compound yet.
PFOA
Comes from the source
5.7 ppt
Highest sample, Dec. 18, 2024; found in 1 of 4
The highest sample was 5.7 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 1.4 ppt, below it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Below EPA’s limits, 3 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 36.4 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 26.2 ppb · Forms or is added in treatment
Averaged by year, the highest was 36.4 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 21.4 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 31.7 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 16.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 31.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 22 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
PFBS, Health benchmark 2,000 ppt; highest 3.4 ppt
Highest sample, Dec. 18, 2024; found in 2 of 4 · Comes from the source
The highest sample was 3.4 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | A sample above EPA’s 2029 limit5.7 ppt highest, found in 1 of 4 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)8.4 ppt highest, found in 4 of 4 samples. Details |
| PFHxS | 10 ppt | Not foundNot found in any of 4 samples, below 3 ppt |
| PFNA | 10 ppt | Not foundNot found in any of 4 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | A sample above EPA’s 2029 limit22 ppt highest, found in 4 of 4 samples. Details |
| PFBS | Index only | Below EPA’s limits3.4 ppt highest, found in 2 of 4 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits1.28 at its highest sampling location, Meter Vault. EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 5.6 ppt | 3 of 4 | None covers it |
| PFHxA | 4.9 ppt | 3 of 4 | None covers it |
25 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, PFOA Reduction
For: PFOS, PFOA
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA)
For: PFOS, PFOA
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOS, PFOA
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOS, PFOA
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOS, PFOA
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOS, PFOA
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOS, PFOA
Disinfectant
Town of Ware Shoals reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are South Carolina’s own from 2020 on, with EPA’s national file for 2012 to 2019. Town of Ware Shoals’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 20 to Dec. 18, 2024; South Carolina’s results run from Sept. 9, 2020 to Sept. 9, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Town of Ware Shoals’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Town of Ware Shoals’s results flag: HFPO-DA (GenX), PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs South Carolina certifies closest to the area Town of Ware Shoals serves, or a kit by mail
The 3 labs South Carolina certifies closest to the area Town of Ware Shoals serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
L&L Environmental Ware Shoals
Ware Shoals, SC · about 2 miles
Certified for bacteria
Alliance Technical Group LLC - Greenville
Greenville, SC · about 28 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
International Product Assurance Laboratories
Anderson, SC · about 33 miles
Certified for lead and copper, metals
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Carolina certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Carolina’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 3 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with HFPO-DA (GenX)
- Get the utility’s own reportTown of Ware Shoals must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- South Carolina Department of Environmental Services, Bureau of Water, results from Jan. 6, 2020 to Oct. 7, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: SCDES, Commercial Environmental Laboratory Mapping (CELMapp), labs certified under the Safe Drinking Water Act, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID SC2410003. Rebuilt from EPA data on Oct. 25, 2026.