Skip to content
TapBuff

McCormick Co W&SA

EPA’s and South Carolina’s records have results for 33 contaminants in its water; 7 were found.

Serves 8,500 people · Surface water bought from another system · McCormick, SC

Serves
8,500 people
Connections
6,701
Water source
Surface water bought from another system
Based in
McCormick, SC
County
McCormick
Owner
Local government
The 8 ZIP codes it serves

29821, 29824, 29835, 29838, 29840, 29844, 29845, 29848

The short answer

EPA recorded violations of the legal limit for total trihalomethanes (TTHM) here in 2022 and 2023. In 2026, the latest year on file, it averaged 60 ppb, below the limit. PFOS is above EPA’s new limit, which takes effect in 2029. 10 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 10 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 17 to Oct. 10, 2023.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): South Carolina’s own results, samples taken from Jan. 14, 2020 to July 30, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, HFPO-DA (GenX) and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFHxA at 3.4 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2023)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

91.8 ppb

Highest yearly average, 2020 to 2026

2026 average: 60 ppb

Averaged by year, the highest was 91.8 ppb, in 2022, above EPA’s legal limit of 80 ppb. Its highest single sample was 150 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded violations for total trihalomethanes (TTHM) at this utility in 2022 and 2023.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 116 ppb, in 2013, and EPA recorded violations in 2014, 2015, 2016 and 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOS

Comes from the source

Above EPA’s new limit (2029)

8.8 ppt

Highest sample, Oct. 10, 2023; found in 4 of 12

The highest sample was 8.8 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.9 ppt, also above it.

What handles it

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 48.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 27.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 48.6 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 96.5 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
HFPO-DA (GenX), EPA’s 2029 limit 10 ppt; highest 6.6 ppt

Highest sample, Oct. 10, 2023; found in 1 of 12 · Comes from the source

The highest sample was 6.6 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

No certification claim covers this compound yet.

About HFPO-DA (GenX)
PFBS, Health benchmark 2,000 ppt; highest 4.9 ppt

Highest sample, Oct. 10, 2023; found in 2 of 12 · Comes from the source

The highest sample was 4.9 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 12 samples, below 4 ppt
PFOS4.0 pptAbove EPA’s new limit (2029)8.8 ppt highest, found in 4 of 12 samples. Details
PFHxS10 pptNot foundNot found in any of 12 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 12 samples, below 4 ppt
HFPO-DA (GenX)10 pptBelow EPA’s limits6.6 ppt highest, found in 1 of 12 samples. Details
PFBSIndex onlyBelow EPA’s limits4.9 ppt highest, found in 2 of 12 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.17 at its highest sampling location, Connection to Calhoun Falls
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
South Carolina utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA3.4 ppt1 of 12None covers it
PFPeA3.4 ppt1 of 12None covers it
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, PFOS Reduction

    For: Total trihalomethanes (TTHM), PFOS

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Perfluorooctane Sulfonate (PFOS)

    For: Total trihalomethanes (TTHM), PFOS

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

Disinfectant

McCormick Co W&SA reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

10 health-based violations since 2016, all for TTHM. The latest began Jan. 1, 2023.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to March 31, 2023, 82 ppbResolved
Oct. 1, 2022 to Dec. 31, 2022, 97 ppbResolved
July 1, 2022 to Sept. 30, 2022, 115 ppbResolved
April 1, 2022 to June 30, 2022, 111 ppbResolved
Jan. 1, 2022 to March 31, 2022, 99 ppbResolved
The other 5, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 2019, 81 ppbResolved
July 1, 2019 to Sept. 30, 2019, 83 ppbResolved
April 1, 2019 to June 30, 2019, 86 ppbResolved
Jan. 1, 2019 to March 31, 2019, 83 ppbResolved
Oct. 1, 2016 to Dec. 31, 2016, 82 ppbResolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are South Carolina’s own from 2020 on, with EPA’s national file for 2012 to 2019. McCormick Co W&SA’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 17 to Oct. 10, 2023; South Carolina’s results run from Jan. 14, 2020 to July 30, 2026.

Testing your own tap

McCormick Co W&SA’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. McCormick Co W&SA’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What McCormick Co W&SA’s results flag: total trihalomethanes (TTHM) and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs South Carolina certifies closest to the area McCormick Co W&SA serves, or a kit by mail

The 3 labs South Carolina certifies closest to the area McCormick Co W&SA serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • L&L Environmental Ware Shoals

    Ware Shoals, SC · about 38 miles

    Certified for bacteria

    (864) 456-2696

  • Eurofins Columbia

    Irmo, SC · about 61 miles

    Certified for bacteria, nitrate, minerals and other inorganics

  • Water Systems Inc.

    West Columbia, SC · about 62 miles

    Certified for bacteria

    (803) 218-8439

All 36 certified labs for South Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SC3520002. Rebuilt from EPA data on Oct. 25, 2026.