Skip to content
TapBuff

Marco Rural Water Co

EPA’s and South Carolina’s records have results for 38 contaminants in its water; 4 were found.

Serves 17,120 people · Groundwater · Marion, SC

Serves
17,120 people
Connections
6,634
Water source
Groundwater
Based in
Marion, SC
County
Marion
Owner
Local government
The 9 ZIP codes it serves

29519, 29543, 29546, 29565, 29571, 29574, 29581, 29589, 29592

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 24 to July 10, 2023.

Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and nitrate: South Carolina’s own results, samples taken from Feb. 24, 2020 to June 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from March 4, 2014 to March 4, 2014. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 13.7 ppb

Highest sample, July 10, 2023; found in 2 of 14 · Comes from the source

The highest sample was 13.7 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Fluoride, Legal limit 4.0 ppm; highest yearly average 3.0 ppm

Highest yearly average, 2020 to 2025 · 2025, one sample: 2.3 ppm · Forms or is added in treatment

Averaged by year, the highest was 3.0 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 3.2 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppm, in 2014.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 39.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 23.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 39.7 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 98.9 ppb. In 2026, the latest year on file, its eight samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 9.8 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 9.8 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 16.6 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.8 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
South Carolina utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Marco Rural Water Co reported disinfecting with chlorine, not chloramine, at all 7 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and nitrate results here are South Carolina’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Marco Rural Water Co’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 24 to July 10, 2023; South Carolina’s results run from Feb. 24, 2020 to June 1, 2026; EPA’s compliance samples are from March 4 to 4, 2014.

Testing your own tap

Marco Rural Water Co’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Marco Rural Water Co’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs South Carolina certifies closest to the area Marco Rural Water Co serves, or a kit by mail

The 3 labs South Carolina certifies closest to the area Marco Rural Water Co serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • FMU Freshwater Ecology Center

    Florence, SC · about 22 miles

    Certified for bacteria

    (843) 661-4470

  • Davis & Brown Inc.

    Florence, SC · about 24 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (843) 665-6746

  • Environmental Systems Testing Services LLC

    Conway, SC · about 31 miles

    Certified for bacteria

    (843) 347-7688

All 36 certified labs for South Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SC3320001. Rebuilt from EPA data on Oct. 25, 2026.