Skip to content
TapBuff

City of Liberty

EPA’s and South Carolina’s records have results for 33 contaminants in its water; 2 were found.

Serves 3,594 people · Surface water bought from another system · Liberty, SC

Serves
3,594 people
Connections
1,616
Water source
Surface water bought from another system
Based in
Liberty, SC
County
Pickens
Owner
Local government
The ZIP code it serves

29657

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 28, 2024 to March 12, 2025.

Haloacetic acids (HAA5) and total trihalomethanes (TTHM): South Carolina’s own results, samples taken from July 16, 2020 to Aug. 13, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 16 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 16 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 20.3 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.6 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 12.6 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 14.2 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
South Carolina utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

City of Liberty reported adding no disinfectant at its one sampling point, in its 2024 to 2025 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are South Carolina’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Liberty’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 28, 2024 to March 12, 2025; South Carolina’s results run from July 16, 2020 to Aug. 13, 2026.

Testing your own tap

City of Liberty’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Liberty’s latest lead sampling in EPA’s records, 2020 to 2022, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs South Carolina certifies closest to the area City of Liberty serves, or a kit by mail

The 3 labs South Carolina certifies closest to the area City of Liberty serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • International Product Assurance Laboratories

    Anderson, SC · about 14 miles

    Certified for lead and copper, metals

    (864) 784-9883

  • Alliance Technical Group LLC - Greenville

    Greenville, SC · about 19 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (864) 232-1556

  • L&L Environmental Ware Shoals

    Ware Shoals, SC · about 37 miles

    Certified for bacteria

    (864) 456-2696

All 36 certified labs for South Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SC3910003. Rebuilt from EPA data on Oct. 25, 2026.