Skip to content
TapBuff

Bjw&Sa

EPA’s and South Carolina’s records have results for 38 contaminants in its water; 10 were found.

Serves 164,829 people · Surface water · Okatie, SC

Serves
164,829 people
Connections
70,268
Water source
Surface water
Based in
Okatie, SC
County
Beaufort
Owner
Local government
The 13 ZIP codes it serves

29902, 29904, 29905, 29906, 29907, 29909, 29910, 29920, 29927, 29935, 29936, 29940, 29945

The short answer

EPA recorded a violation of the legal limit for haloacetic acids (HAA5) here in 2023. In 2026, the latest year on file, it averaged 20.2 ppb, below the limit. PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 14, 2023 to March 24, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2003 to 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic and chromium (total): South Carolina’s own results, samples taken from Jan. 6, 2020 to Sept. 29, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from March 20, 2012 to Feb. 26, 2015. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 3.6 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Haloacetic acids (HAA5)

Forms or is added in treatment

Violation on record (2023)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days.

38.3 ppb

Highest yearly average, 2020 to 2026

2026 average: 20.2 ppb

Averaged by year, the highest was 38.3 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 97.5 ppb. In 2026, the latest year on file, its 80 samples averaged below the limit. EPA recorded a violation for haloacetic acids (HAA5) at this utility in 2023.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 35.7 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOA

Comes from the source

Above EPA’s new limit (2029)

5.6 ppt

Highest sample, Nov. 14, 2023; found in 10 of 22

The highest sample was 5.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 5.0 ppt, also above it.

What handles it

PFOS

Comes from the source

Above EPA’s new limit (2029)

5.3 ppt

Highest sample, Nov. 19, 2024; found in 8 of 22

The highest sample was 5.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 4.4 ppt, also above it.

What handles it

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 50 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 37.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 50 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 101 ppb. In 2026, the latest year on file, its 80 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 52.9 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.84 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.35 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.84 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.87 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.8 ppm, in 2016.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.7 ppm

Highest sample; found in 28 of 47 · 2026 average: 0.14 ppm · Comes from the source

The highest sample, in 2023, was 0.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its five samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.26 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.62 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.62 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFBS, Health benchmark 2,000 ppt; highest 5.7 ppt

Highest sample, Nov. 14, 2023; found in 10 of 22 · Comes from the source

The highest sample was 5.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)5.6 ppt highest, found in 10 of 22 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)5.3 ppt highest, found in 8 of 22 samples. Details
PFHxS10 pptNot foundNot found in any of 22 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 22 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 22 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits5.7 ppt highest, found in 10 of 22 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
South Carolina utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.6 ppt2 of 22None covers it
PFHxA3.2 ppt2 of 22None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, PFOS Reduction, Lead Reduction

    For: PFOA, PFOS, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOA, PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Bjw&Sa reported chloramine at 5 of its 9 sampling points and chlorine without chloramine at 2, and no disinfectant at 2, in its 2023 to 2025 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for total Haloacetic Acids (HAA5). It began Oct. 1, 2023.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2023 to Dec. 31, 2023, 69 ppbResolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic and chromium (total) results here are South Carolina’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Bjw&Sa’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 14, 2023 to March 24, 2025; South Carolina’s results run from Jan. 6, 2020 to Sept. 29, 2026; EPA’s compliance samples are from March 20, 2012 to Feb. 26, 2015.

Testing your own tap

Bjw&Sa’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Bjw&Sa’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0.62 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Bjw&Sa’s results flag: haloacetic acids (HAA5), PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs South Carolina certifies closest to the area Bjw&Sa serves, or a kit by mail

The 3 labs South Carolina certifies closest to the area Bjw&Sa serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • General Environmental Laboratories Inc.

    Hardeeville, SC · about 14 miles

    Certified for bacteria, nitrate

    (843) 987-1438

  • Eurofins Savannah

    Savannah, GA · about 32 miles

    Certified for nitrate, minerals and other inorganics

  • GEL Laboratories LLC

    Charleston, SC · about 51 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics, PFAS, radioactivity

    (843) 556-8171

All 36 certified labs for South Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SC0720003. Rebuilt from EPA data on Oct. 25, 2026.