Skip to content
TapBuff

City of Sweet Home

EPA’s and CDC’s records have results for 38 contaminants in its water; 3 were found.

Serves 10,322 people · Surface water · Sweet Home, OR

Serves
10,322 people
Connections
3,185
Water source
Surface water
Based in
Sweet Home, OR
County
Linn
Owner
Local government
The 2 ZIP codes it serves

97345, 97386

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 12, 2024 to Jan. 15, 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium: Oregon’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from March 8, 2018 to March 8, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 16.4 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 12.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 16.4 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 24.4 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.62 ppm

Highest yearly average, 2018 · Forms or is added in treatment

Averaged by year, the highest was 0.62 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.4 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 2.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 8.4 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.9 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Oregon utilities above EPA’s PFAS limits⁠
35 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 19 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

City of Sweet Home reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium results here are Oregon’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. City of Sweet Home’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 12, 2024 to Jan. 15, 2025; CDC’s yearly averages for Oregon cover 2020 to 2023; EPA’s compliance samples are from March 8 to 8, 2018.

Testing your own tap

City of Sweet Home’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Oregon certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Sweet Home’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Oregon certifies closest to the area City of Sweet Home serves, or a kit by mail

The 3 labs Oregon certifies closest to the area City of Sweet Home serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • EWEB Water Quality Laboratory

    Springfield, OR · about 29 miles

    Certified for bacteria

    (541) 685-7841

  • U.S. Region 9 Lab - Corvallis, OR

    Corvallis, OR · about 30 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, PFAS

    (541) 754-4571

  • Analytical Laboratory Group

    Eugene, OR · about 30 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (541) 485-8404

All 91 certified labs for Oregon⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Oregon certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Oregon’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID OR4100851. Rebuilt from EPA data on Oct. 25, 2026.