Skip to content
TapBuff

City of Sandy

EPA’s and CDC’s records have results for 38 contaminants in its water; 4 were found.

Serves 12,991 people · Surface water · Sandy, OR

Serves
12,991 people
Connections
4,100
Water source
Surface water
Based in
Sandy, OR
County
Clackamas
Owner
Local government
The 2 ZIP codes it serves

97009, 97055

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 13 health-based violations since 2016, 1 with no fix on record in EPA’s file.

Filters for lead, if you want it lower⁠The 13 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 24, 2024 to March 12, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2014 to 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, arsenic and uranium: Oregon’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from June 3, 2019 to June 3, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 49.9 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 44.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 49.9 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 61.5 ppb, in 2015, and EPA recorded violations in 2014, 2015, 2016, 2017 and 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 44.4 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 32.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 44.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48.1 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.1 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest yearly average 0.1 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 0.08 ppm · Comes from the source

Averaged by year, the highest was 0.1 ppm, in 2022, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.6 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Oregon utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

13 health-based violations since 2016, 8 for total Haloacetic Acids (HAA5), 4 for the Surface Water Treatment Rule and 1 for the Long Term 2 Enhanced Surface Water Treatment Rule. The latest began Oct. 1, 2022, and 1 has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Oct. 1, 2022 to Oct. 31, 2022Resolved
Oct. 1, 2018 to Oct. 31, 2018Resolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2018 to March 31, 2018, 69 ppbResolved
Long Term 2 Enhanced Surface Water Treatment RuleWater drawn from a river, lake or reservoir was not filtered as required.EPA: Failure to Filter (SWTR)Dec. 18, 2017No fix on recordEPA: unaddressed
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2017 to Dec. 31, 2017, 70 ppbResolved
The other 8, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2017 to Sept. 30, 2017, 71 ppbResolved
April 1, 2017 to June 30, 2017, 78 ppbResolved
April 1, 2017 to June 30, 2017, 68 ppbResolved
Jan. 1, 2017 to March 31, 2017, 85 ppbResolved
Oct. 1, 2016 to Dec. 31, 2016, 85 ppbResolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Aug. 1, 2016 to Aug. 31, 2016Resolved
Aug. 1, 2016 to Aug. 31, 2016Resolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2016 to March 31, 2016, 64 ppbResolved

Health-based violations only. 22 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Sandy reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, arsenic and uranium results here are Oregon’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. City of Sandy’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 24, 2024 to March 12, 2025; CDC’s yearly averages for Oregon cover 2020 to 2023; EPA’s compliance samples are from June 3 to 3, 2019.

Testing your own tap

City of Sandy’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Oregon certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Sandy’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 4.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Oregon certifies closest to the area City of Sandy serves, or a kit by mail

The 3 labs Oregon certifies closest to the area City of Sandy serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Clackamas River Water Drinking Water Quality Laboratory

    Clackamas, OR · about 14 miles

    Certified for bacteria

    (503) 722-9241

  • Clackamas Water Environment Services-Water Quality Laboratory

    Oregon City, OR · about 15 miles

    Certified for bacteria

    (503) 557-2868

  • Columbia Laboratories Inc.

    Portland, OR · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (503) 254-1794

All 91 certified labs for Oregon⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Oregon certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Oregon’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID OR4100789. Rebuilt from EPA data on Oct. 25, 2026.