Skip to content
TapBuff
ZIP

Brewster Community Homeowners

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
70 people
Connections
14
Water source
Groundwater
Based in
Salem, OR
County
Marion
Owner
Private

The short answer

1 result is above EPA’s legal limit. The worst: Lead, above the action level. 2 health-based violations since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2015 to 2026.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 5.5 ppm, for the period ending June 30, 2013. None since is on file, so it is not counted as a current finding.

Nitrate and uranium: Oregon’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2022, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 27, 2012 to Jan. 12, 2016. Newer results are in the utility’s annual water quality report.

Above the legal limit1

Lead

Comes from pipes, often your own

Above the action level

29.3ppb

90th percentile, 2026

In the latest period, 9 in 10 homes sampled were at or below 29.3 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

3.6ppm

Highest yearly average, 2020 to 2022

Averaged by year, the highest was 3.6 ppm, in 2022, below EPA’s legal limit of 10 ppm. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.5 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.3ppm

Highest yearly average, 2012 to 2016

2016: not found

Averaged by year, the highest was 0.3 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. In 2016, the latest year on file, it wasn’t found in its one sample.

What handles it

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Uranium

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper RuleOCCT/SOWT Treatment Installation/DemonstrationApril 1, 2026—Unaddressed
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)March 12, 2017—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 43 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate and uranium results here are Oregon’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Brewster Community Homeowners’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for Oregon cover 2020 to 2022; EPA’s compliance samples are from Jan. 27, 2012 to Jan. 12, 2016.

Testing your own tap

Brewster Community Homeowners’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Oregon certifies.

No lab Oregon certifies is within 75 miles of the area Brewster Community Homeowners serves on the state’s list. Some take samples by mail; the state’s page lists them all.

Oregon State University Extension Well Water Program: Nitrate screening of well water at many of its groundwater education events. The screening is free. Water Testing Guidance for Private Wells, OSU Well Water Program.

All 91 certified labs for Oregon

Sources

PWSID OR4100762. Rebuilt from EPA data on Oct. 18, 2026.

Also in Marion County

All Oregon utilities

What to do next