Skip to content
TapBuff

Newcastle

EPA’s and Oklahoma’s records have results for 38 contaminants in its water; 7 were found.

Serves 7,900 people · Surface water bought from another system · Newcastle, OK

Serves
7,900 people
Connections
5,032
Water source
Surface water bought from another system
Based in
Newcastle, OK
County
McClain
Owner
Local government
The ZIP code it serves

73065

The short answer

Lead is above the action level in the latest monitoring period, ending June 30, 2026. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 27, 2023 to Jan. 25, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2026.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium: Oklahoma’s own results, samples taken from Jan. 27, 2020 to July 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 5.2 ppt: see it below.

Above the legal limit, 1 result

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

22.5 ppb

90th percentile, 2026

In the latest period, 9 in 10 homes sampled were at or below 22.5 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

40 ppb

Highest sample, Aug. 16, 2023; found in 1 of 6

The highest sample was 40 ppb, about 4 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 72.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 37.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 72.5 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 73.5 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 54.4 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 45.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 18.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 45.9 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 46.1 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 31.8 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.72 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.96 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 0.81 ppm · Comes from the source

The highest sample, in 2024, was 0.96 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.3 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Oklahoma utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA5.2 ppt1 of 6None covers it
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Newcastle reported chloramine at 1 of its 2 sampling points and chlorine without chloramine at 0, and no disinfectant at 1, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium results here are Oklahoma’s own from 2020 on, with EPA’s national file for 2012 to 2019. Newcastle’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 27, 2023 to Jan. 25, 2024; Oklahoma’s results run from Jan. 27, 2020 to July 16, 2026.

Testing your own tap

Newcastle’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Oklahoma certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Newcastle’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 22.5 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Newcastle’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Oklahoma certifies, or a kit by mail

TapBuff hasn’t read Oklahoma’s list of certified labs yet. The national page links every state’s own list.

Certified labs, state by state⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Oklahoma certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Oklahoma’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID OK2004704. Rebuilt from EPA data on Oct. 25, 2026.