Collinsville
EPA’s and Oklahoma’s records have results for 38 contaminants in its water; 3 were found.
Serves 5,400 people · Surface water · Collinsville, OK
- Serves
- 5,400 people
- Connections
- 2,387
- Water source
- Surface water
- Based in
- Collinsville, OK
- County
- Tulsa
- Owner
- Local government
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 9 health-based violations since 2016, all resolved in EPA’s file.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Feb. 12 to Nov. 19, 2024.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.1 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.
Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), nitrate and uranium: Oklahoma’s own results, samples taken from Jan. 8, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.
Arsenic: EPA’s compliance monitoring file, samples taken from April 9, 2013 to April 9, 2013. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 3 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 53.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 37.8 ppb · Forms or is added in treatment
Averaged by year, the highest was 53.8 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 77.2 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 70.3 ppb, in 2014, and EPA recorded violations in 2014, 2015, 2016, 2017, 2018 and 2019.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 68.4 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 40.1 ppb · Forms or is added in treatment
Averaged by year, the highest was 68.4 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 96.1 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 67.8 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.15 ppm
Highest yearly average, 2022 · Forms or is added in treatment
Averaged by year, the highest was 0.15 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.8 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
35 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
- Nitrate
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
9 health-based violations since 2016, 8 for total Haloacetic Acids (HAA5) and 1 for the Lead and Copper Rule Revisions. The latest began Oct. 17, 2024.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule Revisions | The required inventory of lead service lines was not completed or submitted on time.EPA: LSL Inventory | Oct. 17, 2024 | Resolved |
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2019 to Sept. 30, 2019, 61 ppb | Resolved |
| Oct. 1, 2018 to Dec. 31, 2018, 66 ppb | Resolved | ||
| April 1, 2017 to June 30, 2017, 65 ppb | Resolved | ||
| Jan. 1, 2017 to March 31, 2017, 67 ppb | Resolved |
The other 4, back to 2016
| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2016 to Dec. 31, 2016, 67 ppb | Resolved |
| July 1, 2016 to Sept. 30, 2016, 69 ppb | Resolved | ||
| April 1, 2016 to June 30, 2016, 66 ppb | Resolved | ||
| Jan. 1, 2016 to March 31, 2016, 61 ppb | Resolved |
Health-based violations only. 33 monitoring or reporting violations not shown.
Disinfectant
Collinsville reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), nitrate and uranium results here are Oklahoma’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic comes from EPA’s file alone, which ends in 2019. Collinsville’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 12 to Nov. 19, 2024; Oklahoma’s results run from Jan. 8, 2020 to July 15, 2026; EPA’s compliance samples are from April 9 to 9, 2013.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Collinsville’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Oklahoma certifies, or a kit by mail
TapBuff hasn’t read Oklahoma’s list of certified labs yet. The national page links every state’s own list.
Certified labs, state by stateOr test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Oklahoma certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Oklahoma’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportCollinsville must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Oklahoma Department of Environmental Quality, Water Quality Division, results from Jan. 2, 2020 to Oct. 2, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID OK1021505. Rebuilt from EPA data on Oct. 25, 2026.