Pride Valley MHP
What EPA’s and Ohio’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 100 people
- Connections
- 65
- Water source
- Groundwater
- Based in
- Malvern, OH
- County
- Carroll
- Owner
- Private
The ZIP code it serves
The short answer
Nothing in EPA’s and Ohio’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016.
What was found
Lead and copper: lead at 5.0 mg/L (2005) and copper at 50 mg/L (2005) are left out of this report: they are among the results Ohio sent EPA in 2006, all at µg/L magnitudes though EPA’s file marks them mg/L.
Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and nitrate: Ohio’s own results, samples taken from May 13, 2020 to Sept. 29, 2025, with EPA’s 2012 to 2019 file for earlier years.
Below EPA’s limits3
Total trihalomethanes (TTHM)
Forms or is added in treatment
38.4ppb
Highest yearly average, 2020 to 2025
2025, one sample: 7.1 ppb
Averaged by year, the highest was 38.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its one sample was 7.1 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 6.5 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride
Forms or is added in treatment
0.57ppm
Highest yearly average, 2020 to 2023
2023, one sample: 0.52 ppm
Averaged by year, the highest was 0.57 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2023, the latest year on file, its one sample was 0.52 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.55 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5)
Forms or is added in treatment
7.7ppb
Highest yearly average, 2020 to 2025
Averaged by year, the highest was 7.7 ppb, in 2025, below EPA’s legal limit of 60 ppb. That was also the latest year on file.
What handles it
No certification claim covers this compound yet.
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
- Nitrate
Violations since 2016
| Contaminant or rule | Type | Period | Measured | Status |
|---|---|---|---|---|
| Lead and Copper Rule Revisions | The required inventory of lead service lines was not completed or submitted on time.EPA: LSL Inventory | Oct. 17, 2024 | — | Unaddressed |
| Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 4 monitoring or reporting violations not shown. | ||||
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and nitrate results here are Ohio’s own from 2020 on, with EPA’s national file for 2012 to 2019. Pride Valley MHP’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Ohio’s results run from May 13, 2020 to Sept. 29, 2025.
Testing your own tap
The 3 labs Ohio certifies closest to the area Pride Valley MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Canton Water Laboratory
Canton, OH · about 9 miles
Certified for bacteria, nitrate, minerals and other inorganics
Canton City Health Department
Canton, OH · about 10 miles
Certified for bacteria
Ream & Haager Laboratories, Inc.
Dover, OH · about 21 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Ohio Environmental Protection Agency, Division of Drinking and Ground Waters, results from Jan. 2, 2020 to Dec. 31, 2025, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: Ohio EPA, laboratories certified/accepted to perform analyses on public drinking water, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID OH1000512. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Nothing here is above a health goalIn EPA’s and Ohio’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportPride Valley MHP must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded