Portage County Water Resources
EPA’s and Ohio’s records have results for 37 contaminants in its water; 6 were found.
Serves 8,606 people · Groundwater · Ravenna, OH
- Serves
- 8,606 people
- Connections
- 3,969
- Water source
- Groundwater
- Based in
- Ravenna, OH
- County
- Portage
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 3 health-based violations since 2016, 2 with no fix on record in EPA’s file.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Feb. 20 to Aug. 21, 2024.
Lead and copper: copper at 1,200 mg/L (2005) and copper at 710 mg/L (2004) are left out of this report: they are among the results Ohio sent EPA in 2006, all at µg/L magnitudes though EPA’s file marks them mg/L.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.7 ppm, for the period ending Dec. 31, 2001. None since is on file, so it is not counted as a current finding.
Total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5), fluoride, nitrate and arsenic: Ohio’s own results, samples taken from June 9, 2020 to Aug. 5, 2025, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 6 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 12 ppb
Highest sample, Aug. 21, 2024; found in 2 of 4 · Comes from the source
The highest sample was 12 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportTotal trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 46.8 ppb
Highest yearly average, 2020 to 2025 · 2025 average: 39.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 46.8 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 63.5 ppb. In 2025, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 62.5 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Chromium (total), Legal limit 100 ppb; highest yearly average 41.7 ppb
Highest yearly average, 2022 to 2025 · 2025: not found · Comes from the source
Averaged by year, the highest was 41.7 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 250 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples. EPA recorded no violation for chromium (total) at this utility since 2020.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 16.8 ppb
Highest yearly average, 2020 to 2025 · 2025 average: 10.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 16.8 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 19.4 ppb. In 2025, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 18.3 ppb, in 2012.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.0 ppm
Highest yearly average, 2022 to 2025 · 2025 average: 0.97 ppm · Forms or is added in treatment
Averaged by year, the highest was 1.0 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2025, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Nitrate, Legal limit 10 ppm; highest 2.1 ppm
Highest sample; found in 1 of 12 · 2025 average: 1.1 ppm · Comes from the source
The highest sample, in 2025, was 2.1 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.12 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
3 health-based violations since 2016, all for the Lead and Copper Rule. The latest began July 1, 2025, and 2 have no fix on record in EPA’s file.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule | Water chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-Compliance | July 1, 2025 to Dec. 31, 2025 | No fix on recordEPA: archived |
| Jan. 1, 2025 to June 30, 2025 | No fix on recordEPA: archived | ||
| July 1, 2017 to Dec. 31, 2017 | Resolved |
Health-based violations only. 4 monitoring or reporting violations not shown.
Disinfectant
Portage County Water Resources reported chloramine at 1 of its 2 sampling points and chlorine without chloramine at 1, in its 2024 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported permanganate.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5), fluoride, nitrate and arsenic results here are Ohio’s own from 2020 on, with EPA’s national file for 2012 to 2019. Portage County Water Resources’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 20 to Aug. 21, 2024; Ohio’s results run from June 9, 2020 to Aug. 5, 2025.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Portage County Water Resources’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Ohio certifies closest to the area Portage County Water Resources serves, or a kit by mail
The 3 labs Ohio certifies closest to the area Portage County Water Resources serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Portage County Water Resources
Ravenna, OH · about 4 miles
Certified for bacteria, nitrate, minerals and other inorganics
EnviroScience
Stow, OH · about 9 miles
Biosolutions, LLC
Chagrin Falls, OH · about 12 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Ohio certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Ohio’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportPortage County Water Resources must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Ohio Environmental Protection Agency, Division of Drinking and Ground Waters, results from Jan. 2, 2020 to Dec. 31, 2025, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Ohio EPA, laboratories certified/accepted to perform analyses on public drinking water, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID OH6702812. Rebuilt from EPA data on Oct. 25, 2026.