Skip to content
TapBuff
ZIP

Glendale Village PWS

What EPA’s and Ohio’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
2,500 people
Connections
1,200
Water source
Groundwater
Based in
Glendale, OH
County
Hamilton
Owner
Local government
The ZIP code it serves

45246

The short answer

3 results are above the health goal. The worst: Nitrate, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2023. Lead at 5.0 mg/L (2005) and copper at 46.7 mg/L (2005) are left out of this report: they are among the results Ohio sent EPA in 2006, all at µg/L magnitudes though EPA’s file marks them mg/L.

Nitrate, arsenic, fluoride, total trihalomethanes (TTHM), chromium (total) and haloacetic acids (HAA5): Ohio’s own results, samples taken from Feb. 26, 2020 to Dec. 5, 2025, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal3

Nitrate

Comes from the source

Above the health goal

13.3ppm

Highest sample; found in 16 of 17

2025 average: 0.19 ppm

One sample, in 2022, was above EPA’s legal limit of 10 ppm, at 13.3 ppm. The next sample at the same point, within 30 days, brought the average back under the limit. 10 ppm is also EPA’s health goal. In 2025, the latest year on file, its three samples averaged 0.19 ppm. EPA recorded no violation for nitrate at this utility since 2020. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.34 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Arsenic

Comes from the source

Above the health goal

6.5ppb

Highest yearly average, 2020 to 2025

2025 average: 4.0 ppb

Averaged by year, the highest was 6.5 ppb, in 2023: below EPA’s legal limit of 10 ppb, but above its health goal of zero. Its highest single sample was 10 ppb. In 2025, the latest year on file, its four samples averaged 4.0 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.5 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Lead

Comes from pipes, often your own

Above the health goal

0.7ppb

90th percentile, 2021 to 2023

In the latest period, 9 in 10 homes sampled were at or below 0.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits2

Fluoride

Forms or is added in treatment

Below EPA’s limits

1.0ppm

Highest yearly average, 2021 to 2024

2024, one sample: 0.94 ppm

Averaged by year, the highest was 1.0 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. In 2024, the latest year on file, its one sample was 0.94 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppm, in 2012.

What handles it

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

4.4ppb

Highest yearly average, 2020 to 2025

2025 average: 1.9 ppb

Averaged by year, the highest was 4.4 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its two samples averaged 1.9 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 41.1 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Haloacetic acids (HAA5)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Arsenic, Lead

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Arsenic, Lead

    Other certifiers’ wording: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

The best water filters for lead, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, fluoride, total trihalomethanes (TTHM), chromium (total) and haloacetic acids (HAA5) results here are Ohio’s own from 2020 on, with EPA’s national file for 2012 to 2019. Glendale Village PWS’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Ohio’s results run from Feb. 26, 2020 to Dec. 5, 2025.

Testing your own tap

Glendale Village PWS’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Ohio certifies.

The 3 labs Ohio certifies closest to the area Glendale Village PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • ALS Environmental - Cincinnati

    Cincinnati, OH · about 7 miles

    Certified for lead and copper, metals, asbestos

    (513) 733-5336

  • Q Laboratories

    Cincinnati, OH · about 13 miles

    Certified for bacteria, nitrate

    (513) 471-1300

  • Greene County Sanitary Engineering Laboratory

    Beavercreek, OH · about 38 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (937) 562-7450

All 76 certified labs for Ohio

Sources

PWSID OH3100712. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Hamilton County

All Ohio utilities

What to do next