Skip to content
TapBuff

Caesars Village MHP PWS

What EPA’s and Ohio’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
90 people
Connections
44
Water source
Groundwater
Based in
Dayton, OH
County
Warren
Owner
Private
The ZIP code it serves

45068

The short answer

Nothing in EPA’s and Ohio’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Lead and copper: copper at 50 mg/L (2004) is left out of this report: it is one of the results Ohio sent EPA in 2006, all at µg/L magnitudes though EPA’s file marks them mg/L.

Nitrate, fluoride, total trihalomethanes (TTHM), arsenic, chromium (total) and haloacetic acids (HAA5): Ohio’s own results, samples taken from Jan. 12, 2020 to Dec. 18, 2025, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

2.1ppm

Highest sample; found in 20 of 25

2025 average: 0.055 ppm

The highest sample, in 2020, was 2.1 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its four samples averaged 0.055 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.2 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.3ppm

Highest yearly average, 2022 to 2025

2025, one sample: 0.3 ppm

Averaged by year, the highest was 0.3 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its one sample was 0.3 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.44 ppm, in 2016.

What handles it

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

3.0ppb

Highest yearly average, 2020 to 2025

2025, one sample: 0.8 ppb

Averaged by year, the highest was 3.0 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its one sample was 0.8 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.8 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), arsenic, chromium (total) and haloacetic acids (HAA5) results here are Ohio’s own from 2020 on, with EPA’s national file for 2012 to 2019. Caesars Village MHP PWS’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Ohio’s results run from Jan. 12, 2020 to Dec. 18, 2025.

Testing your own tap

Caesars Village MHP PWS’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Ohio certifies.

The 3 labs Ohio certifies closest to the area Caesars Village MHP PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Greene County Sanitary Engineering Laboratory

    Beavercreek, OH · about 14 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (937) 562-7450

  • Dayton Central Water Quality Laboratory

    Dayton, OH · about 23 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (937) 333-6093

  • ALS Environmental - Cincinnati

    Cincinnati, OH · about 25 miles

    Certified for lead and copper, metals, asbestos

    (513) 733-5336

All 76 certified labs for Ohio

Sources

PWSID OH8300012. Rebuilt from EPA data on Oct. 18, 2026.