Skip to content
TapBuff

McKenzie County Wrd

EPA’s records have results for 3 contaminants in its water; 2 were found.

Serves 3,895 people · Surface water bought from another system · Watford City, ND

Serves
3,895 people
Connections
245
Water source
Surface water bought from another system
Based in
Watford City, ND
County
McKenzie
Owner
Private
The 6 ZIP codes it serves

58831, 58835, 58838, 58847, 58854, 59221

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 2011. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from July 17, 2012 to Nov. 18, 2019. Newer results are in the utility’s annual water quality report.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 21.7 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 18.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 21.7 ppb, in 2015, below EPA’s legal limit of 80 ppb. Its highest single sample was 28.5 ppb. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 10.8 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 9.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 10.8 ppb, in 2015, below EPA’s legal limit of 60 ppb. Its highest single sample was 14.3 ppb. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. McKenzie County Wrd’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; EPA’s compliance samples are from July 17, 2012 to Nov. 18, 2019.

Testing your own tap

McKenzie County Wrd’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Dakota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. McKenzie County Wrd’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs North Dakota certifies, or a kit by mail

TapBuff hasn’t read North Dakota’s list of certified labs yet. The national page links every state’s own list.

Certified labs, state by state⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Dakota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Dakota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID ND2701477. Rebuilt from EPA data on Oct. 25, 2026.