Skip to content
TapBuff

Ulster Water District

EPA’s and New York’s records have results for 38 contaminants in its water; 6 were found.

Serves 5,500 people · Surface water bought from another system · Ulster (T), NY

Serves
5,500 people
Connections
1,822
Water source
Surface water bought from another system
Based in
Ulster (T), NY
County
Ulster
Owner
Local government
The 3 ZIP codes it serves

12401, 12449, 12477

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 20 to Nov. 19, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2003 to 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and arsenic: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total), fluoride and uranium: EPA’s compliance monitoring file, samples taken from Sept. 10, 2012 to Oct. 15, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 50.4 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 48.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 50.4 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 104 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 56.4 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 28.1 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 22.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 28.1 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 48 ppb. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 27.2 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.1 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 8.2 ppb

Highest yearly average, 2012 to 2018 · Comes from the source

Averaged by year, the highest was 8.2 ppb, in 2018, below EPA’s legal limit of 100 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.12 ppm

Highest yearly average, 2012 to 2018 · 2018: not found · Forms or is added in treatment

Averaged by year, the highest was 0.12 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, it wasn’t found in its one sample.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.073 ppm

Highest sample; found in 2 of 4 · 2023: not found · Comes from the source

The highest sample, in 2021, was 0.073 ppm, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it wasn’t found.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.03 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
New York utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 22 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Ulster Water District reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and arsenic results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total), fluoride and uranium come from EPA’s file alone, which ends in 2019. Ulster Water District’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 20 to Nov. 19, 2024; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from Sept. 10, 2012 to Oct. 15, 2018.

Testing your own tap

Ulster Water District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New York certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Ulster Water District’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 2.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New York certifies closest to the area Ulster Water District serves, or a kit by mail

The 3 labs New York certifies closest to the area Ulster Water District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Aqua Check Laboratories, Inc.

    Stone Ridge, NY · about 15 miles

    Certified for bacteria

    (845) 687-0420

  • Poughkeepsies' Water Treatment Facility

    Poughkeepsie, NY · about 23 miles

    Certified for bacteria

    (845) 451-4173

  • Environmental Labworks Inc.

    Marlboro, NY · about 28 miles

    Certified for bacteria

    (845) 236-7823

All 161 certified labs for New York⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NY5503390. Rebuilt from EPA data on Oct. 25, 2026.