Liberty Village
EPA’s and New York’s records have results for 38 contaminants in its water; 5 were found.
Serves 3,900 people · Surface water · Liberty (V), NY
- Serves
- 3,900 people
- Connections
- 1,644
- Water source
- Surface water
- Based in
- Liberty (V), NY
- County
- Sullivan
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.
Filters for uranium, if you want it lowerThe violationGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 13 to Oct. 22, 2025.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.5 ppm, for the period ending June 30, 2017. None since is on file, so it is not counted as a current finding.
Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate and arsenic: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.
Uranium, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from Sept. 13, 2012 to July 10, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFPeA at 4.1 ppt: see it below.
Below EPA’s limits, 4 results
Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 54 ppb
Highest yearly average, 2020 to 2024 · 2024 average: 45.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 54 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 100 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 67.6 ppb, in 2014, and EPA recorded a violation in 2017.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 59.1 ppb
Highest yearly average, 2020 to 2024 · 2024 average: 44.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 59.1 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 100 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 66.5 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Nitrate, Legal limit 10 ppm; highest 1.0 ppm
Highest sample; found in 12 of 13 · 2024 average: 0.76 ppm · Comes from the source
The highest sample, in 2024, was 1.0 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and it averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.2 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.17 ppb
Highest yearly average, 2016 · Comes from the source
Averaged by year, the highest was 0.17 ppb, in 2016, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 4.1 ppt | 2 of 10 | None covers it |
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Fluoride
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
1 health-based violation since 2016 for total Haloacetic Acids (HAA5). It began April 1, 2017.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | April 1, 2017 to June 30, 2017, 61.9 ppb | Resolved |
Health-based violations only. 3 monitoring or reporting violations not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsDisinfectant
Liberty Village reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 sampling for EPA. It also reported another disinfectant.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate and arsenic results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Uranium, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Liberty Village’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 13 to Oct. 22, 2025; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from Sept. 13, 2012 to July 10, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Liberty Village’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New York certifies closest to the area Liberty Village serves, or a kit by mail
The 3 labs New York certifies closest to the area Liberty Village serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
AG Environmental RSC LLC Dba Sullivan County Labs
Ferndale, NY · about 7 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Ocl Analytical Services
Bloomingburg, NY · about 24 miles
Certified for bacteria, nitrate, minerals and other inorganics
Aqua Check Laboratories, Inc.
Stone Ridge, NY · about 29 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Nothing here is above an EPA limit or health benchmarkIn EPA’s and New York’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportLiberty Village must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- New York State Department of Health, Environmental Public Health Tracker, results from Jan. 1, 2020 to Dec. 31, 2024, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: NYS Environmental Laboratory Approval Program (ELAP), drinking water labs, as listed in TNI LAMS, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NY5203329. Rebuilt from EPA data on Oct. 25, 2026.