Skip to content
TapBuff

Kensico Water District

EPA’s and New York’s records have results for 36 contaminants in its water; 3 were found.

Serves 17,917 people · Surface water bought from another system · Mount Pleasant (T), NY

Serves
17,917 people
Connections
5,119
Water source
Surface water bought from another system
Based in
Mount Pleasant (T), NY
County
Westchester
Owner
Local government
The 4 ZIP codes it serves

10532, 10570, 10594, 10595

The short answer

EPA recorded violations of the legal limit for haloacetic acids (HAA5) here in 2021 and 2022. In 2024, the latest year on file, it averaged 44.2 ppb, below the limit. 6 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The 6 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 11 to Dec. 9, 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, arsenic and uranium: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

A legal-limit violation on record, below the limit in the latest year, 1 result

Haloacetic acids (HAA5)

Forms or is added in treatment

Violation on record (2022)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days.

63.9 ppb

Highest yearly average, 2020 to 2024

2024 average: 44.2 ppb

Averaged by year, the highest was 63.9 ppb, in 2021, above EPA’s legal limit of 60 ppb. Its highest single sample was 99.7 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded violations for haloacetic acids (HAA5) at this utility in 2021 and 2022.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 56.7 ppb, in 2018, and EPA recorded violations in 2012, 2018 and 2019.

What handles it

No certification claim covers this compound yet.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 52.4 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 36.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 52.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 123 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 58.7 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.16 ppm

Highest sample; found in 4 of 5 · 2024 average: 0.12 ppm · Comes from the source

The highest sample, in 2021, was 0.16 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
New York utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

6 health-based violations since 2016, all for total Haloacetic Acids (HAA5). The latest began Jan. 1, 2022.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2022 to March 31, 2022, 67 ppbResolved
Oct. 1, 2021 to Dec. 31, 2021, 71 ppbResolved
April 1, 2019 to June 30, 2019, 66.5 ppbResolved
Jan. 1, 2019 to March 31, 2019, 70.4 ppbResolved
Oct. 1, 2018 to Dec. 31, 2018, 68.5 ppbResolved
The other one, back to 2018
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2018 to Sept. 30, 2018, 61.6 ppbResolved

Health-based violations only.

Disinfectant

Kensico Water District reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA. It also reported ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, arsenic and uranium results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Kensico Water District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 11 to Dec. 9, 2024; New York’s yearly summaries cover 2020 to 2024.

Testing your own tap

Kensico Water District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New York certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kensico Water District’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Kensico Water District’s results flag: haloacetic acids (HAA5). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New York certifies closest to the area Kensico Water District serves, or a kit by mail

The 3 labs New York certifies closest to the area Kensico Water District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Westchester Co Labs and Research

    Valhalla, NY · about 1 mile

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (914) 231-1768

  • EAS Inc. - Eastern Analytical Services Inc.

    Elmsford, NY · about 4 miles

    Certified for lead and copper, asbestos

    (914) 592-8380

  • Rtca-Radon Testing Corporation of America, Inc.

    Elmsford, NY · about 4 miles

    (914) 345-3380

All 161 certified labs for New York⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NY5930082. Rebuilt from EPA data on Oct. 25, 2026.