Skip to content
TapBuff

Jamestown BPU

EPA’s and New York’s records have results for 38 contaminants in its water; 8 were found.

Serves 46,712 people · Groundwater · Jamestown (C), NY

Serves
46,712 people
Connections
17,100
Water source
Groundwater
Based in
Jamestown (C), NY
County
Chautauqua
Owner
Local government
The 5 ZIP codes it serves

14701, 14710, 14720, 14733, 14750

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, arsenic and uranium, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 5 to Aug. 13, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2026.

Total trihalomethanes (TTHM), nitrate, arsenic and haloacetic acids (HAA5): New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, chromium (total) and uranium: EPA’s compliance monitoring file, samples taken from Nov. 13, 2014 to Aug. 7, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 8 results

Lead, arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 20.8 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 19.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 20.8 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 22.1 ppb. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.7 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 2.5 ppm

Highest sample; found in 5 of 10 · 2024 average: 0.85 ppm · Comes from the source

The highest sample, in 2020, was 2.5 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.1 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.2 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.2 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.7 ppm

Highest yearly average, 2014 to 2019 · 2019 average: 0.29 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.7 ppm, in 2014, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.81 ppm. In 2019, the latest year on file, its two samples averaged below the limit.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.1 ppb

Highest yearly average, 2020 to 2024 · Comes from the source

Averaged by year, the highest was 1.1 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.9 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.8 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.3 ppb

Highest yearly average, 2020 to 2024 · Forms or is added in treatment

Averaged by year, the highest was 3.3 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 5.0 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.6 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 1.4 ppb

Highest yearly average, 2014 to 2018 · 2018: not found · Comes from the source

Averaged by year, the highest was 1.4 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.7 ppb. In 2018, the latest year on file, it wasn’t found in any of its two samples.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.4 ppb

Highest yearly average, 2016 to 2019 · 2019, one sample: 0.37 ppb · Comes from the source

Averaged by year, the highest was 0.4 ppb, in 2016, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2019, the latest year on file, its one sample was below the limit.

What handles it

About uranium
New York utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Lead, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Jamestown BPU reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, arsenic and haloacetic acids (HAA5) results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, chromium (total) and uranium come from EPA’s file alone, which ends in 2019. Jamestown BPU’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 5 to Aug. 13, 2025; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from Nov. 13, 2014 to Aug. 7, 2019.

Testing your own tap

Jamestown BPU’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New York certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Jamestown BPU’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 3.2 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New York certifies closest to the area Jamestown BPU serves, or a kit by mail

The 3 labs New York certifies closest to the area Jamestown BPU serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Chautauqua County Health

    Mayville, NY · about 14 miles

    Certified for bacteria

    (716) 753-4481

  • Pace Analytical Services, LLC - Erie

    Erie, PA · about 34 miles

    Certified for bacteria

    (814) 660-6078

  • Mcandrew Laboratory Inc.

    Orchard Park, NY · about 53 miles

    Certified for bacteria

    (716) 649-7960

All 161 certified labs for New York⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NY0600366. Rebuilt from EPA data on Oct. 25, 2026.