Skip to content
TapBuff

Fort Drum

EPA’s and New York’s records have results for 38 contaminants in its water; 14 were found.

Serves 34,000 people · Surface water bought from another system · Leray (T), NY

Serves
34,000 people
Connections
1,750
Water source
Surface water bought from another system
Based in
Leray (T), NY
County
Jefferson
Owner
Federal government
The 2 ZIP codes it serves

13602, 13603

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, both resolved in EPA’s file.

Filters for arsenic, lead and uranium, if you want them lower⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 21 to Nov. 5, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2009 to 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and nitrate: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, uranium and chromium (total): EPA’s compliance monitoring file, samples taken from May 22, 2012 to Aug. 15, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Five other PFAS with no federal limit were found, the highest 6:2 FTS at 26 ppt: see them below.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Below EPA’s limits, 9 results

Arsenic, lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 41.6 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 31.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 41.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 93.9 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.0 ppt

Highest sample, March 20, 2024; found in 2 of 6 · Comes from the source

The highest sample was 5.0 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 38.3 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 33.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 38.3 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 105 ppb. In 2024, the latest year on file, it averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 53.2 ppb, in 2016, and EPA recorded a violation in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.98 ppm

Highest yearly average, 2012 to 2018 · 2018 average: 0.24 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.98 ppm, in 2013, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, its six samples averaged below the limit.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.9 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 0.4 ppb · Comes from the source

Averaged by year, the highest was 0.9 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.84 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 0.83 ppm

Highest sample; found in 10 of 10 · 2024 average: 0.67 ppm · Comes from the source

The highest sample, in 2022, was 0.83 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 6.9 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.4 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.62 ppb

Highest yearly average, 2017 to 2018 · 2018 average: 0.6 ppb · Comes from the source

Averaged by year, the highest was 0.62 ppb, in 2017, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.64 ppb. In 2018, the latest year on file, its two samples averaged below the limit.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 1.0 ppb

Highest yearly average, 2012 to 2018 · 2018: not found · Comes from the source

Averaged by year, the highest was 1.0 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. In 2018, the latest year on file, it wasn’t found in any of its six samples.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 6 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 6 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits5.0 ppt highest, found in 2 of 6 samples. Details
PFNA10 pptNot foundNot found in any of 6 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 6 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 6 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New York utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
6:2 FTS26 ppt2 of 6None covers it
PFPeA25 ppt2 of 6None covers it
PFHxA13 ppt2 of 6None covers it
PFBA8.0 ppt2 of 6None covers it
PFHpA4.0 ppt2 of 6NSF/ANSI 53: Total PFAS Reduction
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, all for TTHM. The latest began April 1, 2017.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2017 to June 30, 2017, 83.2 ppbResolved
Jan. 1, 2017 to March 31, 2017, 90.2 ppbResolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction, Uranium

    For: Arsenic, Lead, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Fort Drum reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 sampling for EPA. It also reported permanganate and ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and nitrate results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, uranium and chromium (total) come from EPA’s file alone, which ends in 2019. Fort Drum’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 21 to Nov. 5, 2024; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from May 22, 2012 to Aug. 15, 2018.

Testing your own tap

Fort Drum’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New York certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Fort Drum’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New York certifies closest to the area Fort Drum serves, or a kit by mail

The 3 labs New York certifies closest to the area Fort Drum serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Converse Laboratories Inc.

    Watertown, NY · about 8 miles

    Certified for bacteria

    (315) 788-8388

  • Oswego Water Treatment Plant Lab

    Oswego, NY · about 54 miles

    Certified for bacteria

    (315) 342-8187

  • Life Science Laboratories Inc. - North

    Waddington, NY · about 65 miles

    (315) 388-4476

All 161 certified labs for New York⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NY2212214. Rebuilt from EPA data on Oct. 25, 2026.