Skip to content
TapBuff

San Felipe Pueblo

EPA’s records have results for 8 contaminants in its water; 7 were found.

Serves 4,335 people · Groundwater · San Felipe Pueblo, NM

Serves
4,335 people
Connections
691
Water source
Groundwater
Based in
San Felipe Pueblo, NM
Owner
Native American
The ZIP code it serves

87001

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

Filters for arsenic, uranium and lead, if you want them lower⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2023.

Arsenic, uranium, total trihalomethanes (TTHM), nitrate, fluoride, haloacetic acids (HAA5) and chromium (total): EPA’s compliance monitoring file, samples taken from Nov. 15, 2012 to Aug. 28, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 7 results

Arsenic, uranium and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 6.1 ppb

Highest yearly average, 2013 to 2019 · 2019, one sample: 6.1 ppb · Comes from the source

Averaged by year, the highest was 6.1 ppb, in 2018, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2019, the latest year on file, its one sample was below the limit.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 13 ppb

Highest yearly average, 2013 to 2019 · 2019, one sample: 11 ppb · Comes from the source

Averaged by year, the highest was 13 ppb, in 2014, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2019, the latest year on file, its one sample was below the limit.

What handles it

About uranium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 13 ppb

Highest yearly average, 2014 to 2019 · 2019, one sample: 3.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 13 ppb, in 2018, below EPA’s legal limit of 80 ppb. In 2019, the latest year on file, its one sample was below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 1.2 ppm

Highest sample; found in 7 of 13 · 2019 average: 0.55 ppm · Comes from the source

The highest sample, in 2015, was 1.2 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, its two samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.36 ppm

Highest yearly average, 2013 to 2018 · 2018 average: 0.27 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.36 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.73 ppm. In 2018, the latest year on file, its seven samples averaged below the limit.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2021 to 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.1 ppb

Highest yearly average, 2014 to 2019 · 2019: not found · Forms or is added in treatment

Averaged by year, the highest was 2.1 ppb, in 2018, below EPA’s legal limit of 60 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)

Violations since 2016

1 health-based violation since 2016 for the Groundwater Rule. It began Nov. 22, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyNov. 22, 2016Resolved

Health-based violations only. 1 monitoring or reporting violation not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium, Lead Reduction

    For: Arsenic, Uranium, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

What this report can’t tell you

  • Newer results, and everything else. New Mexico sent EPA no routine results for its 2012 to 2019 review, so this page has no routine nitrate, arsenic or disinfection byproduct results for San Felipe Pueblo. They are in its own annual report, which it must send you every year.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; EPA’s compliance samples are from Nov. 15, 2012 to Aug. 28, 2019.

Testing your own tap

San Felipe Pueblo’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Mexico certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. San Felipe Pueblo’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New Mexico certifies closest to the area San Felipe Pueblo serves, or a kit by mail

The 3 labs New Mexico certifies closest to the area San Felipe Pueblo serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • ABCWUA Water Quality Lab

    Albuquerque, NM · about 24 miles

    Certified for bacteria, lead and copper

    (505) 289-3499

  • Environmental Testing Services Co., Inc.

    Albuquerque, NM · about 24 miles

    Certified for bacteria

    (505) 881-0243

  • Eurofins Environmental Testing South Central

    Albuquerque, NM · about 24 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity, asbestos

    (505) 345-3975

All 44 certified labs for New Mexico⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Mexico certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Mexico’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID 063501160. Rebuilt from EPA data on Oct. 25, 2026.