Stillwater Water District 1
What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 1,200 people
- Connections
- 402
- Water source
- Groundwater
- Based in
- Stillwater Twp., NJ
- County
- Sussex
- Owner
- Local government
The ZIP code it serves
The short answer
1 result is above the health goal. The worst: Uranium, above the health goal. 1 health-based violation since 2016.
What handles itWhat was found
Uranium, total trihalomethanes (TTHM), haloacetic acids (HAA5) and arsenic: New Jersey’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.
Nitrate, fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from July 16, 2012 to Nov. 19, 2018. Newer results are in the utility’s annual water quality report.
Above the health goal1
Uranium
Comes from the source
3.3ppb
Highest yearly average, 2020 to 2021
Averaged by year, the highest was 3.3 ppb, in 2021: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 5.5 ppb, in 2016.
What handles it
- NSF/ANSI 58 look for “Uranium”
Below EPA’s limits5
Nitrate
Comes from the source
3.4ppm
Highest sample; found in 8 of 10
2013 average: 1.2 ppm
The highest sample, in 2012, was 3.4 ppm, below EPA’s legal limit of 10 ppm. In 2013, the latest year on file, its five samples averaged 1.2 ppm.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM)
Forms or is added in treatment
14.8ppb
Highest yearly average, 2020 to 2023
2023 average: 0.75 ppb
Averaged by year, the highest was 14.8 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged 0.75 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 25.9 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
8.6ppb
Highest yearly average, 2020 to 2023
2023: not found
Averaged by year, the highest was 8.6 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 34.1 ppb, in 2014.
What handles it
No certification claim covers this compound yet.
Fluoride
Forms or is added in treatment
0.093ppm
Highest yearly average, 2012 to 2018
2018 average: 0.006 ppm
Averaged by year, the highest was 0.093 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.15 ppm. In 2018, the latest year on file, its 10 samples averaged 0.006 ppm.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total)
Comes from the source
1.6ppb
Highest yearly average, 2012 to 2018
2018: not found
Averaged by year, the highest was 1.6 ppb, in 2015, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.0 ppb. In 2018, the latest year on file, it wasn’t found in any of its five samples.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Lead
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsViolations since 2016
| Contaminant or rule | Type | Period | Measured | Status |
|---|---|---|---|---|
| Revised Total Coliform Rule | Coliform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR) | Dec. 13, 2021 | — | Resolved |
| Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 254 monitoring or reporting violations not shown. | ||||
What this report can’t tell you
Everything else. Uranium, total trihalomethanes (TTHM), haloacetic acids (HAA5) and arsenic results here are New Jersey’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Nitrate, fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Stillwater Water District 1’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for New Jersey cover 2020 to 2023; EPA’s compliance samples are from July 16, 2012 to Nov. 19, 2018.
Testing your own tap
The 3 labs New Jersey certifies closest to the area Stillwater Water District 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Well Qualified LLC
Lafayette, NJ · about 8 miles
Advanced Water Technology LLC
Sparta, NJ · about 10 miles
Radata Analytical Lab
Flanders, NJ · about 16 miles
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- CDC Environmental Public Health Tracking Network, yearly averages New Jersey supplied to CDC, 2020 to 2023, read Oct. 8, 2026. TapBuff’s comparisons with EPA’s limits are its own, not CDC’s or New Jersey’s.
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: NJDEP Office of Quality Assurance, certified drinking water labs, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NJ1920001. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Read up on UraniumWhat each one does to health, where it comes from, and the certification claim that addresses it.About Uranium
- Get the utility’s own reportStillwater Water District 1 must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Compare certified filtersWhat the filters certified for these results cost over five years, cartridges included.Compare five-year costs