Skip to content
TapBuff

Rollinsford Water Sewer Dist

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,688 people
Connections
639
Water source
Groundwater
Based in
Rollinsford, NH
County
Strafford
Owner
Local government
The ZIP code it serves

03869

The short answer

1 result is above EPA’s legal limit, and 2 more are above the health goal. The worst: Lead, above the action level. 4 health-based violations since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2017.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 3.7 ppm, for the period ending Dec. 31, 1993. None since is on file, so it is not counted as a current finding.

Arsenic, uranium, total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5): New Hampshire’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Nov. 16, 2016 to Dec. 18, 2019. Newer results are in the utility’s annual water quality report.

Above the legal limit1

Lead

Comes from pipes, often your own

Above the action level

43ppb

90th percentile, 2017

In the latest period, 9 in 10 homes sampled were at or below 43 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Above the health goal2

Arsenic

Comes from the source

Above the health goal

4.2ppb

Highest yearly average, 2020 to 2023

Averaged by year, the highest was 4.2 ppb, in 2023: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 11.8 ppb, in 2017, and EPA recorded a violation in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Uranium

Comes from the source

Above the health goal

0.21ppb

Highest yearly average, 2021

Averaged by year, the highest was 0.21 ppb, in 2021: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Below EPA’s limits4

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

19.8ppb

Highest yearly average, 2020 to 2023

2023 average: 5.9 ppb

Averaged by year, the highest was 19.8 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged 5.9 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 18.1 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Nitrate

Comes from the source

Below EPA’s limits

1.7ppm

Highest yearly average, 2020 to 2023

2023 average: 1.3 ppm

Averaged by year, the highest was 1.7 ppm, in 2021, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged 1.3 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.5 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.59ppm

Highest yearly average, 2016 to 2019

Averaged by year, the highest was 0.59 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

What handles it

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

4.0ppb

Highest yearly average, 2020 to 2023

2023 average: 3.0 ppb

Averaged by year, the highest was 4.0 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged 3.0 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.0 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Lead, Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best reverse osmosis systems, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
BenzeneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2025 to March 31, 20250.006 MG/LResolved
BenzeneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2024 to Dec. 31, 20240.007 MG/LResolved
Lead and Copper RuleOCCT/SOWT Treatment Installation/DemonstrationOct. 13, 2017—Resolved
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2017 to Dec. 31, 20170.012 MG/LResolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 1 monitoring or reporting violation not shown.

What this report can’t tell you

  • Everything else. Arsenic, uranium, total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5) results here are New Hampshire’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Rollinsford Water Sewer Dist’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for New Hampshire cover 2020 to 2023; EPA’s compliance samples are from Nov. 16, 2016 to Dec. 18, 2019.

Testing your own tap

Rollinsford Water Sewer Dist’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Hampshire certifies.

The 3 labs New Hampshire certifies closest to the area Rollinsford Water Sewer Dist serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Seacoast Analytical Services LLC

    Lee, NH · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (603) 868-1457

  • Eurofins Portsmouth

    Portsmouth, NH · about 10 miles

    Certified for bacteria

    (603) 436-2001

  • Nelson Analytical LLC - Maine Division

    Kennebunk, ME · about 18 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (207) 467-3478

All 63 certified labs for New Hampshire

Sources

PWSID NH2011010. Rebuilt from EPA data on Oct. 18, 2026.