Skip to content
TapBuff

Highland Colony

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
88 people
Connections
35
Water source
Groundwater
Based in
Holderness, NH
County
Grafton
Owner
Private
The ZIP code it serves

03245

The short answer

1 result is above EPA’s legal limit. The worst: Lead, above the action level. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2021.

Arsenic and nitrate: New Hampshire’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023.

Fluoride, chromium (total) and uranium: EPA’s compliance monitoring file, samples taken from May 12, 2015 to May 8, 2018. Newer results are in the utility’s annual water quality report.

Above the legal limit1

Lead

Comes from pipes, often your own

Above the action level

32ppb

90th percentile, 2019 to 2021

In the latest period, 9 in 10 homes sampled were at or below 32 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

1.2ppm

Highest yearly average, 2015 to 2018

2018, one sample: 1.1 ppm

Averaged by year, the highest was 1.2 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, its one sample was 1.1 ppm.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Nitrate
  • Uranium

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper RuleA required study or plan for corrosion control was not done on time.EPA: OCCT/SOWT Study/RecommendationJan. 11, 2022—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 2 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic and nitrate results here are New Hampshire’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, chromium (total) and uranium come from EPA’s file alone, which ends in 2019. Highland Colony’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for New Hampshire cover 2020 to 2023; EPA’s compliance samples are from May 12, 2015 to May 8, 2018.

Testing your own tap

Highland Colony’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Hampshire certifies.

The 3 labs New Hampshire certifies closest to the area Highland Colony serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Laconia Water Works Laboratory

    Lakeport, NH · about 14 miles

    Certified for bacteria

    (603) 524-1096

  • New Hampshire DHHS Public Health Laboratories

    Concord, NH · about 34 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (603) 271-3445

  • Endyne Inc.

    Lebanon, NH · about 34 miles

    Certified for bacteria, nitrate

    (603) 678-4891

All 63 certified labs for New Hampshire

Sources

PWSID NH1162010. Rebuilt from EPA data on Oct. 18, 2026.