Skip to content
TapBuff

City of Oneill

EPA’s and Nebraska’s records have results for 36 contaminants in its water; 6 were found.

Serves 3,705 people · Groundwater · O'Neill, NE

Serves
3,705 people
Connections
1,716
Water source
Groundwater
Based in
O'Neill, NE
County
Holt
Owner
Local government
The ZIP code it serves

68763

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 4 health-based violations since 2016, all resolved in EPA’s file.

Filters for arsenic and lead, if you want them lower⁠The 4 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 3, 2023 to Dec. 3, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2025.

Arsenic, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM): Nebraska’s own results, samples taken from Jan. 7, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 11.4 ppb

Highest sample, April 3, 2023; found in 5 of 6 · Comes from the source

The highest sample was 11.4 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 7.2 ppb

Highest yearly average, 2021 to 2025 · 2025, one sample: 5.8 ppb · Comes from the source

Averaged by year, the highest was 7.2 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.6 ppb. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.5 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.1 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.64 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.1 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.6 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppm, in 2014.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 1.2 ppm

Highest sample; found in 23 of 23 · 2026 average: 0.52 ppm · Comes from the source

The highest sample, in 2026, was 1.2 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.9 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.1 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 0.88 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 0.88 ppb, in 2026, below EPA’s legal limit of 100 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.3 ppb, in 2014.

What handles it

About chromium (total)
Nebraska utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

4 health-based violations since 2016, 3 for the Revised Total Coliform Rule and 1 for coliform (TCR). The latest began May 1, 2018.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)May 1, 2018 to May 31, 2018Resolved
Sept. 1, 2016 to Sept. 30, 2016Resolved
July 1, 2016 to July 31, 2016Resolved
Coliform (TCR)Too many samples in a month tested positive for coliform bacteria.EPA: Maximum Contaminant Level Violation, Monthly (TCR)Jan. 1, 2016 to Jan. 31, 2016Resolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Oneill reported adding no disinfectant at all 3 of its sampling points, in its 2023 to 2024 sampling for EPA.

What that means

Most utilities add chlorine or chloramine. CDC says some that draw groundwater don’t need a disinfectant, because testing shows the water doesn’t carry enough germs to make people sick. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM) results here are Nebraska’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Oneill’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 3, 2023 to Dec. 3, 2024; Nebraska’s results run from Jan. 7, 2020 to Sept. 15, 2026.

Testing your own tap

City of Oneill’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Nebraska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Oneill’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 1.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Nebraska certifies, or a kit by mail

No lab Nebraska certifies is within 75 miles of the area City of Oneill serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 5 certified labs for Nebraska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Nebraska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Nebraska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NE3108904. Rebuilt from EPA data on Oct. 25, 2026.