Skip to content
TapBuff

City of Holdrege

EPA’s and Nebraska’s records have results for 38 contaminants in its water; 9 were found.

Serves 5,555 people · Groundwater · Holdrege, NE

Serves
5,555 people
Connections
2,778
Water source
Groundwater
Based in
Holdrege, NE
County
Phelps
Owner
Local government
The ZIP code it serves

68949

The short answer

EPA recorded a violation of the legal limit for nitrate here in 2022. In 2026, the latest year on file, it averaged 7.1 ppm, below the limit. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 16 to Dec. 17, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2025.

Nitrate, uranium, arsenic, fluoride, chromium (total) and total trihalomethanes (TTHM): Nebraska’s own results, samples taken from Jan. 14, 2020 to Aug. 12, 2026, with EPA’s 2012 to 2019 file for earlier years.

Haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Aug. 26, 2019 to Aug. 26, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

A legal-limit violation on record, below the limit in the latest year, 1 result

Nitrate

Comes from the source

Violation on record (2022)

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. A violation like this calls for a notice to customers within 24 hours. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

13.3 ppm

Highest sample; found in 102 of 102

2026 average: 7.1 ppm

From 2020 to 2022, two samples were above EPA’s legal limit of 10 ppm, the highest 13.3 ppm in 2022. Every one came back under the limit on the next sample at the same point. In 2026, the latest year on file, its 11 samples averaged below the limit. EPA recorded a violation for nitrate at this utility in 2022.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 9.6 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

22.9 ppb

Highest sample, June 23, 2025; found in 11 of 11

The highest sample was 22.9 ppb, about 2.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Uranium, arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 16.7 ppb

Highest yearly average, 2022 to 2026 · Comes from the source

Averaged by year, the highest was 16.7 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 18.2 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13.3 ppb, in 2013.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.8 ppb

Highest yearly average, 2022 to 2025 · 2025 average: 3.8 ppb · Comes from the source

Averaged by year, the highest was 3.8 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.0 ppb. In 2025, the latest year on file, its five samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.8 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Lead, Action level 15 ppb · health goal zero; 90th percentile 5.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 5.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.79 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.27 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.79 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.7 ppm. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2015.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 4.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.4 ppb · Comes from the source

Averaged by year, the highest was 4.3 ppb, in 2024, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.2 ppb, in 2012.

What handles it

About chromium (total)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.57 ppb

Highest yearly average, 2019 · Forms or is added in treatment

Averaged by year, the highest was 0.57 ppb, in 2019, below EPA’s legal limit of 60 ppb. That is the only year on file.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.094 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.094 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 0.75 ppb. In 2026, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.5 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nebraska utilities above EPA’s PFAS limits⁠
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Uranium, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Uranium, Arsenic, Lead

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Holdrege reported adding no disinfectant at all 6 of its sampling points, in its 2025 sampling for EPA.

What that means

Most utilities add chlorine or chloramine. CDC says some that draw groundwater don’t need a disinfectant, because testing shows the water doesn’t carry enough germs to make people sick. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for nitrate-Nitrite. It began Oct. 1, 2022.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Nitrate-NitriteThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2022 to Dec. 31, 2022, 12 ppmResolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Nitrate, uranium, arsenic, fluoride, chromium (total) and total trihalomethanes (TTHM) results here are Nebraska’s own from 2020 on, with EPA’s national file for 2012 to 2019. Haloacetic acids (HAA5) comes from EPA’s file alone, which ends in 2019. City of Holdrege’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 16 to Dec. 17, 2025; Nebraska’s results run from Jan. 14, 2020 to Aug. 12, 2026; EPA’s compliance samples are from Aug. 26 to 26, 2019.

Testing your own tap

City of Holdrege’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Nebraska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Holdrege’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 5.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Holdrege’s results flag: nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 2 labs Nebraska certifies closest to the area City of Holdrege serves, or a kit by mail

The 2 labs Nebraska certifies closest to the area City of Holdrege serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • American Agricultural Laboratory

    McCook, NE · about 67 miles

    Certified for bacteria, nitrate

  • Central District Health Department

    Grand Island, NE · about 68 miles

    Certified for bacteria

All 5 certified labs for Nebraska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Nebraska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Nebraska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NE3113705. Rebuilt from EPA data on Oct. 25, 2026.