Skip to content
TapBuff

Zenith Colony

What EPA’s and Montana’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
70 people
Connections
14
Water source
Groundwater
Based in
Cut Bank, MT
County
Glacier
Owner
Private
The ZIP code it serves

59427

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM): Montana’s own results, samples taken from Feb. 10, 2020 to March 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from April 3, 2012 to Sept. 17, 2019. Newer results are in the utility’s annual water quality report.

Above the health goal1

Uranium

Comes from the source

Above the health goal

10ppb

Highest yearly average, 2012 to 2019

2019, one sample: 4.0 ppb

Averaged by year, the highest was 10 ppb, in 2013: below EPA’s legal limit of 30 ppb, but above its health goal of zero. In 2019, the latest year on file, its one sample was 4.0 ppb.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

0.8ppm

Highest sample; found in 7 of 7

2026, one sample: 0.1 ppm

The highest sample, in 2020, was 0.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 0.1 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 1.7 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.2ppm

Highest yearly average, 2020 to 2023

2023, one sample: 0.2 ppm

Averaged by year, the highest was 0.2 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2023, the latest year on file, its one sample was 0.2 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2012.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Violations since 2016

No health-based violations on file with EPA since 2016. There are 34 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM) results here are Montana’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Zenith Colony’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Montana’s results run from Feb. 10, 2020 to March 16, 2026; EPA’s compliance samples are from April 3, 2012 to Sept. 17, 2019.

Testing your own tap

Zenith Colony’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Montana certifies.

No lab Montana certifies is within 75 miles of the area Zenith Colony serves on the state’s list. Some take samples by mail; the state’s page lists them all.

Montana State Environmental Laboratory: Private well testing packages for bacteria, metals, nutrients, anions, organic chemicals and more, open to the public. Samples can be mailed, sent by the lab's free courier, or dropped off at the lab. Environmental Laboratory, Montana Department of Public Health and Human Services.

All 36 certified labs for Montana

Sources

PWSID MT0004768. Rebuilt from EPA data on Oct. 18, 2026.