Skip to content
TapBuff
ZIP

Milltown Water Users Asso South

What EPA’s and Montana’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
85 people
Connections
34
Water source
Groundwater
Based in
Milltown, MT
County
Missoula
Owner
Private
The ZIP code it serves

59851

The short answer

2 results are above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, uranium, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM): Montana’s own results, samples taken from March 6, 2020 to March 6, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal2

Arsenic

Comes from the source

Above the health goal

2.0ppb

Highest yearly average, 2020 to 2025

2025: not found

Averaged by year, the highest was 2.0 ppb, in 2020: below EPA’s legal limit of 10 ppb, but above its health goal of zero. In 2025, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Uranium

Comes from the source

Above the health goal

0.6ppb

Highest yearly average, 2025

Averaged by year, the highest was 0.6 ppb, in 2025: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Below EPA’s limits2

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.06ppm

Highest yearly average, 2020

Averaged by year, the highest was 0.06 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.14ppm

One sample

2020, one sample: 0.14 ppm

The highest sample, in 2020, was 0.14 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its one sample was 0.14 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.2 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Violations since 2016

No health-based violations on file with EPA since 2016.

What this report can’t tell you

  • Everything else. Arsenic, uranium, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM) results here are Montana’s own from 2020 on, with EPA’s national file for 2012 to 2019. Milltown Water Users Asso South’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Montana’s results run from March 6, 2020 to March 6, 2026.

Testing your own tap

Milltown Water Users Asso South’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Montana certifies.

The 3 labs Montana certifies closest to the area Milltown Water Users Asso South serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Missoula CCHD Water Lab

    Missoula, MT · about 3 miles

    Certified for bacteria

    (406) 523-4755

  • RD Water Lab, LLC

    Missoula, MT · about 6 miles

    Certified for bacteria

    (406) 721-8179

  • Water Technologies Laboratory

    Missoula, MT · about 7 miles

    Certified for bacteria

    (406) 549-8868

Montana State Environmental Laboratory: Private well testing packages for bacteria, metals, nutrients, anions, organic chemicals and more, open to the public. Samples can be mailed, sent by the lab's free courier, or dropped off at the lab. Environmental Laboratory, Montana Department of Public Health and Human Services.

All 36 certified labs for Montana

Sources

PWSID MT0003088. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Missoula County

All Montana utilities

What to do next