Skip to content
TapBuff

Martinsdale Colony

What EPA’s and Montana’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
150 people
Connections
10
Water source
Groundwater
Based in
Martinsdale, MT
County
Wheatland
Owner
Private
The ZIP code it serves

59053

The short answer

Nothing in EPA’s and Montana’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Fluoride, nitrate, arsenic, chromium (total), haloacetic acids (HAA5), total trihalomethanes (TTHM) and uranium: Montana’s own results, samples taken from Aug. 3, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits2

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.9ppm

Highest yearly average, 2022

Averaged by year, the highest was 0.9 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.3ppm

Highest sample; found in 1 of 7

2026: not found

The highest sample, in 2022, was 0.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.02 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)
  • Uranium

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Fluoride, nitrate, arsenic, chromium (total), haloacetic acids (HAA5), total trihalomethanes (TTHM) and uranium results here are Montana’s own from 2020 on, with EPA’s national file for 2012 to 2019. Martinsdale Colony’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Montana’s results run from Aug. 3, 2020 to Aug. 5, 2026.

Testing your own tap

Martinsdale Colony’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Montana certifies.

The 2 labs Montana certifies closest to the area Martinsdale Colony serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bridger Analytical Laboratory

    Bozeman, MT · about 69 miles

    Certified for bacteria, minerals and other inorganics

    (406) 582-0822

  • Aqua Tech Laboratory

    Lewistown, MT · about 72 miles

    Certified for bacteria

    (406) 538-6988

Montana State Environmental Laboratory: Private well testing packages for bacteria, metals, nutrients, anions, organic chemicals and more, open to the public. Samples can be mailed, sent by the lab's free courier, or dropped off at the lab. Environmental Laboratory, Montana Department of Public Health and Human Services.

All 36 certified labs for Montana

Sources

PWSID MT0000445. Rebuilt from EPA data on Oct. 18, 2026.