Skip to content
TapBuff

Town of Byhalia

EPA’s and Mississippi’s records have results for 38 contaminants in its water; 5 were found.

Serves 4,446 people · Groundwater · Byhalia, MS

Serves
4,446 people
Connections
1,684
Water source
Groundwater
Based in
Byhalia, MS
County
Marshall
Owner
Local government
The ZIP code it serves

38611

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead, if you want it lower⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 23 to Dec. 16, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 1996 to 2023.

Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), nitrate and uranium: Mississippi’s own results, samples taken from April 8, 2020 to May 21, 2025.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

38.2 ppb

Highest sample, Oct. 22, 2025; found in 6 of 6

The highest sample was 38.2 ppb, about 3.8 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.68 ppm

Highest yearly average, 2022 to 2025 · 2025 average: 0.68 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.68 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.7 ppm. In 2025, the latest year on file, its three samples averaged below the limit.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 9.4 ppb

Highest yearly average, 2021 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 9.4 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 12.6 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.8 ppb

90th percentile, 2021 to 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.0 ppb

Highest yearly average, 2021 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 3.0 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 3.3 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Mississippi utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Groundwater Rule. It began Aug. 4, 2022.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyAug. 4, 2022Resolved

Health-based violations only. 9 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Town of Byhalia reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), nitrate and uranium results here are Mississippi’s own from 2020 on. Town of Byhalia’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 23 to Dec. 16, 2025; Mississippi’s results run from April 8, 2020 to May 21, 2025.

Testing your own tap

Town of Byhalia’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Mississippi certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Town of Byhalia’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Town of Byhalia’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Mississippi certifies, or a kit by mail

No lab Mississippi certifies is within 75 miles of the area Town of Byhalia serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 5 certified labs for Mississippi⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Mississippi certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Mississippi’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MS0470001. Rebuilt from EPA data on Oct. 25, 2026.