Skip to content
TapBuff

Okatoma Water Association #1

EPA’s and Mississippi’s records have results for 8 contaminants in its water; 7 were found.

Serves 3,981 people · Groundwater · Mount Olive, MS

Serves
3,981 people
Connections
1,508
Water source
Groundwater
Based in
Mount Olive, MS
County
Simpson
Owner
Public and private
The 5 ZIP codes it serves

39111, 39116, 39119, 39168, 39428

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 1996 to 2025.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride, chromium (total) and uranium: Mississippi’s own results, samples taken from May 11, 2020 to Sept. 28, 2026.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 7 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 7.3 ppm

Highest sample; found in 42 of 57 · 2026 average: 1.8 ppm · Comes from the source

The highest sample, in 2025, was 7.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 15.2 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 15.2 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 15.5 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 6.0 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 4.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 6.0 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 8.3 ppb. In 2026, the latest year on file, its one sample was below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.8 ppb

Highest yearly average, 2022 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 0.8 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2025, the latest year on file, it wasn’t found in any of its three samples.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.13 ppm

Highest yearly average, 2022 to 2025 · 2025 average: 0.041 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.13 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its three samples averaged below the limit.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 0.9 ppb

Highest yearly average, 2022 to 2025 · Comes from the source

Averaged by year, the highest was 0.9 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.2 ppb. That was also the latest year on file.

What handles it

About chromium (total)
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Uranium

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride, chromium (total) and uranium results here are Mississippi’s own from 2020 on. Okatoma Water Association #1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Mississippi’s results run from May 11, 2020 to Sept. 28, 2026.

Testing your own tap

Okatoma Water Association #1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Mississippi certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Okatoma Water Association #1’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 3.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Mississippi certifies closest to the area Okatoma Water Association #1 serves, or a kit by mail

The lab Mississippi certifies closest to the area Okatoma Water Association #1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bonner Analytical Testing, Inc.

    Hattiesburg, MS · about 34 miles

    Certified for bacteria

    (601) 264-2854

All 5 certified labs for Mississippi⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Mississippi certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Mississippi’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MS0640009. Rebuilt from EPA data on Oct. 25, 2026.