Skip to content
TapBuff

Collinsville Water Assn

EPA’s and Mississippi’s records have results for 8 contaminants in its water; 5 were found.

Serves 3,403 people · Groundwater · Collinsville, MS

Serves
3,403 people
Connections
1,289
Water source
Groundwater
Based in
Collinsville, MS
County
Lauderdale
Owner
Public and private
The ZIP code it serves

39325

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Fluoride, haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM), chromium (total), arsenic and uranium: Mississippi’s own results, samples taken from March 16, 2020 to Sept. 30, 2026.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.48 ppm

Highest yearly average, 2020 to 2024 · 2024: not found · Forms or is added in treatment

Averaged by year, the highest was 0.48 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.75 ppm. In 2024, the latest year on file, it wasn’t found in its one sample.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.0 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 4.0 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 8.3 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.12 ppm

Highest sample; found in 3 of 9 · 2026: not found · Comes from the source

The highest sample, in 2022, was 0.12 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.54 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 0.54 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 2.1 ppb. In 2025, the latest year on file, it wasn’t found in any of its five samples.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.4 ppb

Highest yearly average, 2020 to 2024 · 2024: not found · Comes from the source

Averaged by year, the highest was 0.4 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.8 ppb. In 2024, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Lead
  • Uranium

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Fluoride, haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM), chromium (total), arsenic and uranium results here are Mississippi’s own from 2020 on. Collinsville Water Assn’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Mississippi’s results run from March 16, 2020 to Sept. 30, 2026.

Testing your own tap

Collinsville Water Assn’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Mississippi certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Collinsville Water Assn’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Mississippi certifies, or a kit by mail

No lab Mississippi certifies is within 75 miles of the area Collinsville Water Assn serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 5 certified labs for Mississippi⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Mississippi certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Mississippi’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MS0380002. Rebuilt from EPA data on Oct. 25, 2026.