Skip to content
TapBuff

Buckatunna Water Association

EPA’s and Mississippi’s records have results for 38 contaminants in its water; 7 were found.

Serves 4,913 people · Groundwater · Buckatunna, MS

Serves
4,913 people
Connections
1,861
Water source
Groundwater
Based in
Buckatunna, MS
County
Wayne
Owner
Public and private
The 3 ZIP codes it serves

39322, 39362, 39367

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, both resolved in EPA’s file.

Filters for lead and arsenic, if you want them lower⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 20, 2025 to Feb. 17, 2026.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, chromium (total), nitrate and uranium: Mississippi’s own results, samples taken from June 1, 2020 to Aug. 19, 2026.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 13.4 ppb

Highest sample, Nov. 19, 2025; found in 11 of 12 · Comes from the source

The highest sample was 13.4 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 30 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 14.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 30 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 30 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 6.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 30 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 35.1 ppb. In 2026, the latest year on file, its one sample was below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.77 ppm

Highest yearly average, 2022 to 2025 · 2025 average: 0.6 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.77 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.0 ppm. In 2025, the latest year on file, its six samples averaged below the limit.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.8 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.13 ppb

Highest yearly average, 2022 to 2025 · 2025 average: 0.1 ppb · Comes from the source

Averaged by year, the highest was 0.13 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.8 ppb. In 2025, the latest year on file, its six samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Chromium (total), Legal limit 100 ppb; highest yearly average 0.27 ppb

Highest yearly average, 2022 to 2025 · Comes from the source

Averaged by year, the highest was 0.27 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.6 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Mississippi utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, 1 for the Lead and Copper Rule Revisions and 1 for coliform (TCR). The latest began Oct. 17, 2024.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024Resolved
Coliform (TCR)Too many samples in a month tested positive for coliform bacteria.EPA: Maximum Contaminant Level Violation, Monthly (TCR)Feb. 1, 2016 to Feb. 29, 2016Resolved

Health-based violations only. 1 monitoring or reporting violation not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Buckatunna Water Association reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2025 to 2026 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, chromium (total), nitrate and uranium results here are Mississippi’s own from 2020 on. Buckatunna Water Association’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 20, 2025 to Feb. 17, 2026; Mississippi’s results run from June 1, 2020 to Aug. 19, 2026.

Testing your own tap

Buckatunna Water Association’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Mississippi certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Buckatunna Water Association’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Mississippi certifies closest to the area Buckatunna Water Association serves, or a kit by mail

The lab Mississippi certifies closest to the area Buckatunna Water Association serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bonner Analytical Testing, Inc.

    Hattiesburg, MS · about 52 miles

    Certified for bacteria

    (601) 264-2854

All 5 certified labs for Mississippi⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Mississippi certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Mississippi’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MS0770001. Rebuilt from EPA data on Oct. 25, 2026.