South Saint Paul
EPA’s and Minnesota’s records have results for 36 contaminants in its water; 10 were found.
Serves 20,664 people · Groundwater · South St. Paul, MN
- Serves
- 20,664 people
- Connections
- 6,841
- Water source
- Groundwater
- Based in
- South St. Paul, MN
- County
- Dakota
- Owner
- Local government
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 5 health-based violations since 2016, all resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 5 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from May 13 to Nov. 7, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.
Nitrate, arsenic and uranium: Minnesota’s yearly summaries per water system, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.
Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 27, 2012 to Oct. 24, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFAS: PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFBA at 168 ppt: see them below.
A sample above EPA’s 2029 limit, below it on average, 1 result
PFOA
Comes from the source
7.6 ppt
Highest sample, Nov. 7, 2024; found in 1 of 10
The highest sample was 7.6 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.8 ppt, below it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Below EPA’s limits, 6 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.6 ppt
Highest sample, Nov. 7, 2024; found in 1 of 10 · Comes from the source
The highest sample was 5.6 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Lead, Action level 15 ppb · health goal zero; 90th percentile 8.0 ppb
90th percentile, 2023 to 2025 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 8.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.3 ppm
Highest yearly average, 2012 to 2019 · 2019 average: 0.73 ppm · Forms or is added in treatment
Averaged by year, the highest was 1.3 ppm, in 2013, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.4 ppm. In 2019, the latest year on file, its four samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Nitrate, Legal limit 10 ppm; highest yearly average 1.0 ppm
Highest yearly average, 2023 to 2025 · 2025 average: 0.6 ppm · Comes from the source
Averaged by year, the highest was 1.0 ppm, in 2023, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 3.3 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Chromium (total), Legal limit 100 ppb; highest yearly average 0.41 ppb
Highest yearly average, 2012 to 2018 · 2018: not found · Comes from the source
Averaged by year, the highest was 0.41 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. In 2018, the latest year on file, it wasn’t found in any of its two samples.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
PFBS, Health benchmark 2,000 ppt; highest 4.7 ppt
Highest sample, Nov. 7, 2024; found in 1 of 10 · Comes from the source
The highest sample was 4.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | A sample above EPA’s 2029 limit7.6 ppt highest, found in 1 of 10 samples. Details |
| PFOS | 4.0 ppt | Not foundNot found in any of 10 samples, below 4 ppt |
| PFHxS | 10 ppt | Below EPA’s limits5.6 ppt highest, found in 1 of 10 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 10 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 10 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits4.7 ppt highest, found in 1 of 10 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits0.28 at its highest sampling location, Well #4 Entry Point |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFBA | 168 ppt | 8 of 10 | None covers it |
| PFPeA | 11 ppt | 2 of 10 | None covers it |
| PFHxA | 4.7 ppt | 1 of 10 | None covers it |
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFMBA
- PFMPA
- PFNA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.
- NSF/ANSI 53
Claims: PFOA Reduction, Lead Reduction
For: PFOA, Lead
Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Perfluorooctanoic Acid (PFOA), Lead Reduction
For: PFOA, Lead
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOA; also lead, found below its limits
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOA; also lead, found below its limits
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOA; also lead, found below its limits
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOA; also lead, found below its limits
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOA; also lead, found below its limits
Every filter certified for it
Disinfectant
South Saint Paul reported adding no disinfectant at all 5 of its sampling points, in its 2024 sampling for EPA.
What that means
Most utilities add chlorine or chloramine. CDC says some that draw groundwater don’t need a disinfectant, because testing shows the water doesn’t carry enough germs to make people sick. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
5 health-based violations since 2016, 2 for gross alpha radiation (excluding radon and uranium), 2 for combined Radium (-226 and -228) and 1 for the Revised Total Coliform Rule. The latest began Jan. 1, 2020.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Gross alpha radiation (excluding radon and uranium) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2020 to Dec. 31, 2020, 14 PCI/L | Resolved |
| Combined Radium (-226 and -228) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2020 to Dec. 31, 2020, 8.4 PCI/L | Resolved |
| Oct. 1, 2018 to Dec. 31, 2018, 6.5 PCI/L | Resolved | ||
| Gross alpha radiation (excluding radon and uranium) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2018 to Dec. 31, 2018, 17.2 PCI/L | Resolved |
| Revised Total Coliform Rule | E. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR) | Sept. 1, 2018 to Sept. 30, 2018 | Resolved |
Health-based violations only.
What this report can’t tell you
Everything else. Nitrate, arsenic and uranium results here are Minnesota’s own yearly summaries from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. South Saint Paul’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 13 to Nov. 7, 2024; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Jan. 27, 2012 to Oct. 24, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. South Saint Paul’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 8.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What South Saint Paul’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Minnesota certifies closest to the area South Saint Paul serves, or a kit by mail
The 3 labs Minnesota certifies closest to the area South Saint Paul serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Pace Analytical Services, LLC - Minneapolis
Minneapolis, MN · about 11 miles
Certified for bacteria, nitrate, lead and copper, metals
RMB Environmental Laboratories, Inc. - Burnsville
Burnsville, MN · about 14 miles
Certified for bacteria, nitrate
Tri-City/William Lloyd Analytical Lab
Bloomington, MN · about 15 miles
Certified for bacteria, nitrate, metals
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on PFOAWhat it does to health, where it comes from, and the certification claim that addresses it.About PFOA
- Get the utility’s own reportSouth Saint Paul must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Minnesota Department of Health, Minnesota Public Health Data Access, results from Jan. 1, 2023 to Dec. 31, 2025, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Minnesota Department of Health, accredited labs in Minnesota accepting drinking water samples from private well users, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MN1190020. Rebuilt from EPA data on Oct. 25, 2026.