Skip to content
TapBuff

Savage

EPA’s and Minnesota’s records have results for 38 contaminants in its water; 6 were found.

Serves 30,285 people · Surface water bought from another system · Savage, MN

Serves
30,285 people
Connections
10,443
Water source
Surface water bought from another system
Based in
Savage, MN
County
Scott
Owner
Local government
The ZIP code it serves

55378

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 2 health-based violations since 2016, none with a fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 12 to Oct. 4, 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium: Minnesota’s yearly summaries per water system, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, chromium (total) and arsenic: EPA’s compliance monitoring file, samples taken from Feb. 29, 2012 to Nov. 20, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

21.1 ppb

Highest sample, Sept. 12, 2023; found in 4 of 4

The highest sample was 21.1 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 23.8 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 16.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 23.8 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.0 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.61 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppm, in 2014, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.3 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 3.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest yearly average 0.2 ppm

Highest yearly average, 2023 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 0.2 ppm, in 2023, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it wasn’t found.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.57 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.29 ppb

Highest yearly average, 2014 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 0.29 ppb, in 2014, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.33 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
Minnesota utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, all for combined Radium (-226 and -228). The latest began April 1, 2024, and none has a fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Combined Radium (-226 and -228)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2024 to June 30, 2024, 5.2 PCI/LNo fix on recordEPA: archived
Oct. 1, 2023 to Dec. 31, 2023, 6.3 PCI/LNo fix on recordEPA: archived

Health-based violations only.

Disinfectant

Savage reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 sampling for EPA. It also reported another disinfectant and permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium results here are Minnesota’s own yearly summaries from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride, chromium (total) and arsenic come from EPA’s file alone, which ends in 2019. Savage’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 12 to Oct. 4, 2023; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Feb. 29, 2012 to Nov. 20, 2019.

Testing your own tap

Savage’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Savage’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Savage’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Minnesota certifies closest to the area Savage serves, or a kit by mail

The 3 labs Minnesota certifies closest to the area Savage serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Tri-City/William Lloyd Analytical Lab

    Bloomington, MN · about 5 miles

    Certified for bacteria, nitrate, metals

    (952) 563-4904

  • RMB Environmental Laboratories, Inc. - Burnsville

    Burnsville, MN · about 5 miles

    Certified for bacteria, nitrate

    (952) 456-8470

  • Twin City Water Clinic, Inc.

    Hopkins, MN · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (952) 935-3556

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1700008. Rebuilt from EPA data on Oct. 25, 2026.