Skip to content
TapBuff

Marshall

EPA’s and Minnesota’s records have results for 37 contaminants in its water; 7 were found.

Serves 13,890 people · Groundwater · Marshall, MN

Serves
13,890 people
Connections
4,880
Water source
Groundwater
Based in
Marshall, MN
County
Lyon
Owner
Local government
The ZIP code it serves

56258

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 8 to Oct. 9, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2003 to 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.8 ppm, for the period ending Dec. 31, 1996. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), arsenic and haloacetic acids (HAA5): Minnesota’s yearly summaries per water system, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 6, 2012 to Nov. 4, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

59.1 ppb

Highest sample, Oct. 9, 2024; found in 2 of 2

The highest sample was 59.1 ppb, about 5.9 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Lead, Action level 15 ppb · health goal zero; 90th percentile 8.0 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 8.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.7 ppt

Highest sample, Oct. 9, 2024; found in 2 of 2 · Comes from the source

The highest sample was 4.7 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.89 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.63 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.89 ppm, in 2014, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.99 ppm. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest yearly average 0.4 ppm

Highest yearly average, 2023 to 2025 · 2025 average: 0.1 ppm · Comes from the source

Averaged by year, the highest was 0.4 ppm, in 2024, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.1 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.5 ppb

Highest yearly average, 2023 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 0.5 ppb, in 2024, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, it wasn’t found.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.49 ppb

Highest yearly average, 2014 · Comes from the source

Averaged by year, the highest was 0.49 ppb, in 2014, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.58 ppb. That is the only year on file.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 2 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 2 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits4.7 ppt highest, found in 2 of 2 samples. Details
PFNA10 pptNot foundNot found in any of 2 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 2 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 2 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Minnesota utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Haloacetic acids (HAA5)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Marshall reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), arsenic and haloacetic acids (HAA5) results here are Minnesota’s own yearly summaries from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Marshall’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 8 to Oct. 9, 2024; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Feb. 6, 2012 to Nov. 4, 2019.

Testing your own tap

Marshall’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Marshall’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 8.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Marshall’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 2 labs Minnesota certifies closest to the area Marshall serves, or a kit by mail

The 2 labs Minnesota certifies closest to the area Marshall serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Southwest Health and Human Services

    Marshall, MN · under a mile

    Certified for bacteria, nitrate

    (507) 537-6713

  • Minnesota Valley Testing Laboratories, Inc.

    New Ulm, MN · about 65 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (507) 354-8517

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1420006. Rebuilt from EPA data on Oct. 25, 2026.