Skip to content
TapBuff

Kasson

EPA’s and Minnesota’s records have results for 37 contaminants in its water; 4 were found.

Serves 6,850 people · Groundwater · Kasson, MN

Serves
6,850 people
Connections
2,735
Water source
Groundwater
Based in
Kasson, MN
County
Dodge
Owner
Local government
The 2 ZIP codes it serves

55944, 55955

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 11 to July 26, 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and nitrate: Minnesota’s yearly summaries per water system, 2023 to 2025.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 13, 2012 to Nov. 19, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppb; highest 9.0 ppb

Highest sample, July 26, 2023; found in 1 of 6 · Comes from the source

The highest sample was 9.0 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.2 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.65 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.2 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.4 ppm. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 8.7 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 7.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 8.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.8 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 3.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 3.8 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Minnesota utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Kasson reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and nitrate results here are Minnesota’s own yearly summaries from 2023 on. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Kasson’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 11 to July 26, 2023; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Feb. 13, 2012 to Nov. 19, 2019.

Testing your own tap

Kasson’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kasson’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Minnesota certifies closest to the area Kasson serves, or a kit by mail

The 3 labs Minnesota certifies closest to the area Kasson serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Southeastern Minnesota Water Analysis Laboratory

    Rochester, MN · about 17 miles

    Certified for bacteria, nitrate

    (507) 328-7495

  • Red Wing City Laboratory

    Red Wing, MN · about 34 miles

    Certified for bacteria

    (651) 385-5143

  • Fillmore SWCD Water Quality Laboratory

    Preston, MN · about 41 miles

    Certified for bacteria

    (507) 765-3878

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1200005. Rebuilt from EPA data on Oct. 25, 2026.