Skip to content
TapBuff

Dayton

EPA’s and Minnesota’s records have results for 7 contaminants in its water; 3 were found.

Serves 4,985 people · Groundwater · Dayton, MN

Serves
4,985 people
Connections
3,322
Water source
Groundwater
Based in
Dayton, MN
County
Hennepin
Owner
Local government
The 2 ZIP codes it serves

55327, 55369

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and nitrate: Minnesota’s yearly summaries per water system, 2023 to 2025.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 23, 2012 to Oct. 22, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 31.5 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 20.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 31.5 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.2 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.48 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.2 ppm, in 2013, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.2 ppm. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 7.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and nitrate results here are Minnesota’s own yearly summaries from 2023 on. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Dayton’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Jan. 23, 2012 to Oct. 22, 2019.

Testing your own tap

Dayton’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dayton’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Minnesota certifies closest to the area Dayton serves, or a kit by mail

The 3 labs Minnesota certifies closest to the area Dayton serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Instrumental Research, Inc.

    Fridley, MN · about 11 miles

    Certified for bacteria, nitrate

    (763) 571-3698

  • EMSL Analytical, Inc.

    New Hope, MN · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (763) 449-4922

  • Water Laboratories, Inc.

    Elk River, MN · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (763) 441-7509

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1270073. Rebuilt from EPA data on Oct. 25, 2026.