Skip to content
TapBuff

Burnsville

EPA’s and Minnesota’s records have results for 38 contaminants in its water; 7 were found.

Serves 64,317 people · Surface water · Burnsville, MN

Serves
64,317 people
Connections
16,193
Water source
Surface water
Based in
Burnsville, MN
County
Dakota
Owner
Local government
The 2 ZIP codes it serves

55306, 55337

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 18, 2023 to Jan. 28, 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium: Minnesota’s yearly summaries per water system, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, chromium (total) and arsenic: EPA’s compliance monitoring file, samples taken from Jan. 9, 2012 to Oct. 2, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 25.5 ppt: see it below.

Below EPA’s limits, 6 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 11.7 ppb

Highest sample, Aug. 12, 2024; found in 3 of 4 · Comes from the source

The highest sample was 11.7 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 32.7 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 18.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 32.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.0 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.59 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppm, in 2014, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.7 ppb

Highest yearly average, 2023 to 2025 · 2025 average: 3.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.7 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest yearly average 0.6 ppm

Highest yearly average, 2023 to 2025 · 2025 average: 0.2 ppm · Comes from the source

Averaged by year, the highest was 0.6 ppm, in 2024, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.6 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.23 ppb

Highest yearly average, 2012 to 2014 · Comes from the source

Averaged by year, the highest was 0.23 ppb, in 2014, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.31 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Minnesota utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA25.5 ppt4 of 4None covers it
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Burnsville reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 to 2025 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium results here are Minnesota’s own yearly summaries from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride, chromium (total) and arsenic come from EPA’s file alone, which ends in 2019. Burnsville’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 18, 2023 to Jan. 28, 2025; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Jan. 9, 2012 to Oct. 2, 2019.

Testing your own tap

Burnsville’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Burnsville’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Minnesota certifies closest to the area Burnsville serves, or a kit by mail

The 3 labs Minnesota certifies closest to the area Burnsville serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • RMB Environmental Laboratories, Inc. - Burnsville

    Burnsville, MN · about 2 miles

    Certified for bacteria, nitrate

    (952) 456-8470

  • Tri-City/William Lloyd Analytical Lab

    Bloomington, MN · about 6 miles

    Certified for bacteria, nitrate, metals

    (952) 563-4904

  • Twin City Water Clinic, Inc.

    Hopkins, MN · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (952) 935-3556

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1190002. Rebuilt from EPA data on Oct. 25, 2026.