Skip to content
TapBuff

Benson

EPA’s and Minnesota’s records have results for 8 contaminants in its water; 6 were found.

Serves 3,437 people · Groundwater · Benson, MN

Serves
3,437 people
Connections
1,478
Water source
Groundwater
Based in
Benson, MN
County
Swift
Owner
Local government
The ZIP code it serves

56215

The short answer

Copper and lead are above the action level in the latest monitoring period, ending Dec. 31, 2026. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2026.

Nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5): Minnesota’s yearly summaries per water system, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 30, 2012 to Oct. 21, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Above the legal limit, 2 results

Copper

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.

1.7 ppm

90th percentile, 2024 to 2026

In the latest period, 9 in 10 homes sampled were at or below 1.7 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

16 ppb

90th percentile, 2024 to 2026

In the latest period, 9 in 10 homes sampled were at or below 16 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits, 4 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.4 ppm

Highest yearly average, 2012 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 1.4 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.9 ppm. That was also the latest year on file.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest yearly average 1.7 ppm

Highest yearly average, 2023 to 2025 · 2025 average: 1.6 ppm · Comes from the source

Averaged by year, the highest was 1.7 ppm, in 2023, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.0 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.75 ppb

Highest yearly average, 2013 to 2019 · Comes from the source

Averaged by year, the highest was 0.75 ppb, in 2019, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.5 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.0 ppb

Highest yearly average, 2023 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppb, in 2025, below EPA’s legal limit of 80 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Haloacetic acids (HAA5)
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Copper Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Copper, Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Copper Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Copper, Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Minnesota’s own yearly summaries from 2023 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Benson’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Minnesota’s yearly summaries cover 2023 to 2025; EPA’s compliance samples are from Jan. 30, 2012 to Oct. 21, 2019.

Testing your own tap

Benson’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Minnesota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Benson’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 16 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Minnesota certifies closest to the area Benson serves, or a kit by mail

The 3 labs Minnesota certifies closest to the area Benson serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Steven M. Traut Wells, Inc.

    Alexandria, MN · about 40 miles

    Certified for bacteria, nitrate

    (320) 762-1528

  • Southwest Health and Human Services

    Marshall, MN · about 61 miles

    Certified for bacteria, nitrate

    (507) 537-6713

  • Traut Water Analysis Lab

    St. Joseph, MN · about 66 miles

    Certified for bacteria, nitrate

    (320) 251-5090

All 24 certified labs for Minnesota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Minnesota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Minnesota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MN1760008. Rebuilt from EPA data on Oct. 25, 2026.