Skip to content
TapBuff

Dearborn Heights

EPA’s and the City of Dearborn Heights’ records have results for 35 contaminants in its water; 4 were found.

Serves 57,774 people · Surface water bought from another system · Dearborn Heights, MI

Serves
57,774 people
Connections
24,400
Water source
Surface water bought from another system
Based in
Dearborn Heights, MI
County
Wayne
Owner
Local government
The 2 ZIP codes it serves

48125, 48127

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, 1 with no fix on record in EPA’s file.

The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 16, 2023 to March 13, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate: the annual water quality reports the City of Dearborn Heights publishes, 2025.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 40 ppb

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 40 ppb, below EPA’s legal limit of 80 ppb.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 29 ppb

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 29 ppb, below EPA’s legal limit of 60 ppb.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.5 ppm

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.5 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.35 ppm

Highest result, 2025 · 2025 average: 0.35 ppm · Comes from the source

The highest sample, in 2025, was 0.35 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and it averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Michigan utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, 1 for the Lead and Copper Rule Revisions and 1 for the Lead and Copper Rule. The latest began Oct. 17, 2024, and 1 has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024No fix on recordEPA: unaddressed
Lead and Copper RuleRequired information about lead was not given to customers.EPA: Public EducationAug. 7, 2020Resolved

Health-based violations only. 14 monitoring or reporting violations not shown.

Disinfectant

Dearborn Heights reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 to 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate results here are from the annual water quality reports the City of Dearborn Heights publishes, from 2025 on. Dearborn Heights’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 16, 2023 to March 13, 2024; the reports the City of Dearborn Heights publishes cover 2025.

Testing your own tap

Dearborn Heights’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Michigan certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dearborn Heights’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Michigan certifies closest to the area Dearborn Heights serves, or a kit by mail

The 3 labs Michigan certifies closest to the area Dearborn Heights serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Aqua Check LLC

    Dearborn, MI · about 1 mile

    Certified for bacteria

    (734) 417-3647

  • Microbiological Associates

    Wayne, MI · about 7 miles

    Certified for bacteria

    (248) 324-4800

  • Paragon Laboratories, Inc.

    Livonia, MI · about 7 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (734) 462-3900

All 193 certified labs for Michigan⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Michigan certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Michigan’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MI0001740. Rebuilt from EPA data on Oct. 25, 2026.