Skip to content
TapBuff

Auburn Hills

EPA’s records have results for 31 contaminants in its water; 1 was found.

Serves 21,412 people · Surface water bought from another system · Auburn Hills, MI

Serves
21,412 people
Connections
5,637
Water source
Surface water bought from another system
Based in
Auburn Hills, MI
County
Oakland
Owner
Local government
The 4 ZIP codes it serves

48309, 48326, 48359, 48360

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 30 to Oct. 25, 2023.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 8.2 ppt: see it below.

None of the contaminants in the records below were found at or above the reporting levels.

Michigan utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA8.2 ppt3 of 4None covers it
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 5 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Auburn Hills reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA. It also reported ozone.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Newer results, and everything else. Michigan sent EPA no routine results for its 2012 to 2019 review, so this page has no routine nitrate, arsenic or disinfection byproduct results for Auburn Hills. They are in its own annual report, which it must send you every year.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 30 to Oct. 25, 2023.

Testing your own tap

Auburn Hills’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Michigan certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Auburn Hills’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Michigan certifies closest to the area Auburn Hills serves, or a kit by mail

The 3 labs Michigan certifies closest to the area Auburn Hills serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Absolute Laboratories, Inc.

    Auburn Hills, MI · about 1 mile

    Certified for bacteria, nitrate

    (877) 343-5227

  • Oakland Co. Health Division Laboratory

    Pontiac, MI · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (248) 858-1310

  • Aqua Test Laboratories

    White Lake, MI · about 12 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (248) 698-9500

All 193 certified labs for Michigan⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Michigan certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Michigan’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MI0005450. Rebuilt from EPA data on Oct. 25, 2026.